Tool Boxes & Cabinets and Benches
Delta SteelTransfer tanks are designed for the toughest conditions. Made of heavy-duty .125 tread plate steel, the tanks have internal baffles for reinforcing and controlling the flow of the contents when moving. All tanks are pressure tested for leaks.
- All tanks are pressure tested for leaks.
- 2-in reinforced bungs allow convenient use from either side.
- Filter system recommended.
- Built-in lifting rings to assist with lifting and moving an empty tank.
- Lockable filler cap and coupler prevent excessive pressure build up.
- Heavy-duty brackets to secure the tank to the truck bed.
- All brackets must be bolted to the truck bed.
- Safety Fill Capacity: 103 Gallons
- Maximum Fill Capacity: 109 Gallons
- Dimensions: 22½"W x14"H x 13"D
- Weight: 42lbs
- Warranty: 5 Year Limited Warranty
- Paint Type: Powder Coated
- Powder coat finish
- Holds either metric or S.A.E. tools
- Lid secures tools in position when closed
- Locking latch secures tools from unauthorized use
- Lock cylinder has double-cut keys for easier locking and unlocking
- Weather stripping creates a tight seal against dust and moisture
- Gas spring raises lid when unlatched for easy tool access
- Sturdy side handles make moving easy
- Tool inventory at a glance
- 5 Year Limited Warranty
TracVan; Double. Aerodynamic And Quiet. Damage Free Installation. Internal Web Structure For Increased Strength. Includes Aluminum End Caps. Adjustable Tie Downs. 100 Percent Rust Free Aluminum.Learn More
- All-welded, adjustable height legs (29"H - 41"H on 1" increments)
- Painted Steel Bench Top
- Includes full-length stringer
- Accessory Kit is available, which includes backstop, end stops and lower shelf
- Made in the U.S.A.
- Dimensions: 72" W x 34" D x 72" H
- Choose from 20 different finish colors
Nissan NV mounting kit for the EZ-Glide System.Learn More
This heavy-duty Northern Tool + Equipment in-frame truck box is designed for mounting between the frame and truck rails to provide low-profile access for storage of heavy chains, binders and tie-down straps. Features rugged 0.100 diamond plate aluminum construction. U.S.A. Application: To provide low-profile access for storage of heavy chains, binders and tie-down straps, Dimensions L x W x H (in.): 24 x 22 x 10, Handle Type: T-Handle, Finish Type: Smooth body aluminum finish with diamond plate open lid, Mount Type: Between frame and truck rails.Learn More
Dee Zee Tool Box - Hardware Series Double Lid (Gull Wing) Crossover. Constructed of heavy duty steel. Protected by wrinkle white NRT (No Rust Technology) rust inhibitor powder coat finish. Crown style lid with a full pan double-V stiffener for superior rigidity. Other features: lockable stainless steel paddle handles, dampened gas shocks, closed cell foam gasket, and self-adjusting strikers. Removable plastic tool tray to help keep small items organized.
- HARDware Series - Gull Wing Tool Box
- 20-Gauge Steel Construction
- Texture White Powder Coat Finish
- NRT Powder Coat Is A Specially Designed To Increase Corrosion Protection
- Lockable Stainless Steel Paddle Handle Latches
- Double V-Pan Lid Stiffener Creates Strength And Rigidity
- Internal Bends Add Superior Body Strength
- Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
- Dampened Gas Shocks Open At A Steady, Controlled Rate
- Removable Plastic Tool Tray To Keep Smaller Items Organized
- L: 69.75" x W: 20" x H: 12.2" ; Vol: 8.4 cu. ft.
- L-1: 60.75"; W-1: 17.125"; W-2: 1.44"; H-1: 5"; H-2: 7.2"
- Made In USA
- Limited-Lifetime Warranty
Chest Box; Wedge; L 48 in. x W 20 in. x H 17.25 in. Designed To Fit Against Back Of Cab. Stainless Steel Lock Handles For Strength/Security. Aluminum Lid Supports Heavy Loads. Self Closing Struts. MicroSeal Stripping Seals Out Moisture. Lid Opens 90 Degree For Easy Loading. Aluminum One Piece Tub and Lid. Patented Fully Foamed Lid.Learn More