Tool Boxes & Cabinets and Benches
Dee Zee Transfer Tanks - A safe and convenient means for transporting non-flammable liquids. Steel, protected by black NRT (No Rust Technology) rust inhibitor powder coat finish. Radius curve design eliminates key weld pressure points. Feature 3 stability baffles, lockable cap, .375" drainage plug, and venting coupler. Tanks are intended for private use (non-commercial). Not designed for use as an auxiliary fuel system. Not for use with gasoline. Does not meet title 49 of the United Stated Federal Registry.
- Specialty Series Transfer Tank
- Heavy-Duty 14-Gauge Steel
- Texture Black Powder Coat Finish
- NRT Powder Coat Is A Specially Designed To Increase Corrosion Protection
- Radius Curve Eliminates Weld Pressure Points
- Includes Cap And Coupler For Venting
- 3 Stability Baffles And Drain Plug
- Volume: 50 Gallon Capacity
- L-Shape Design
- Made In USA
- Limited-Lifetime Warranty
Delta Steel Transfer tanks are designed for the toughest conditions. Made of heavy-duty .125 tread plate aluminum, the tanks have internal baffles for reinforcing and controlling the flow of the contents when moving. All tanks are pressure tested for leaks.
- Internal baffles add extra strength and control the flow of the contents when moving.
- 2-in reinforced bungs allow convenient use from either side.
- Filter system recommended.
- Built-in lifting rings to assist with lifting and moving an empty tank.
- Lockable filler cap and coupler prevent excessive pressure build up.
- Heavy-duty brackets to secure the tank to the truck bed.
- All brackets must be bolted to the truck bed.
- Safety Fill Capacity: 98 Gallons
- Maximum Fill Capacity: 106 Gallons
Dee Zee Tool Box - Provides safe and convenient transportation for your dogs. Made from heavy duty Brite-Tread aluminum. Improved door design eliminates sharp edges. Vented for proper air circulation. Removable entry divider allows for versatility. New and improved latches accept your padlock for security.
- Specialty Series Chest Dog Box
- Non-Rusting .056 Brite-Tread Aluminum
- Door Design Eliminates Sharp Edges
- Vented Doors For Proper Air Circulation
- Removable Entry Divider
- Improved Latches Secure Doors Tightly
- L: 38 :_mage_bind_var_127 x H: 20" ; Vol: 12.75 cu. ft.
- Made In USA
- Limited-Lifetime Warranty
Delta PRO Aluminum Crossovers provide superior security for tools and equipment. The combination of our Gear-Lock Dual Rotary Locking System, RSL Rigid Structural Lid, and our high-strength body will resist over 1,000 pounds of prying for to break in.
- Gear-Lock self-adjusting dual rotary locking system always latches and closes for superior security
- Self-aligning latch pin pivots from side-to-side to engage with the Gear-Lock System; no adjustments required
- 3-Layer Laminated RSL Rigid Structural Lid has a reverse beveled edge liner and an inner layer of rigid foam insulation to create the most rigid, strongest aluminum lid we've tested
- Reinforced high-strength body and full-wide lock console resists cargo damage and protects the lock system
- End-mounted push buttons provide easy access; lid locks and unlocks from either side for security and safety
- Heavy-duty guards protect the vertical-action gas spring lid lifts and help ensure long-term durability
- Built-in storage bin on both ends and 4-compartment sliding tray for convenient hand tool and small item storage Learn More
Underbed Boxes are designed to be mounted on the underside of the frame of medium and heavy-duty work trucks.
They can be used on trailers. Also in many other locations where space is available for storing heavy, bulky equipment.
Mounting brackets are available.
- 360 Degree rain gutter channels protects contents from moisture and debris
- High strength hinge provides maximum strength and durability.
- Three-point locking system
- Lock engages three sides for superior security.
- Dimensions (Length x Width x Height): 36" x 18" x 18"
Dimensions in inches: 70 1/8A x 60 1/8B x 14 1/4C x 9D x 20 1/4E x 20 7/8F x 71G (Click here for dimension reference.)
This Delta Pro Aluminum single lid truck box fits the following fullsize truck models:
- Dodge: Ram Series 1500,2500 and 3500
- Ford: 6.5' and 8' long bed F150, F250, F350 except F150 with 4 dr. cab and flaresides
- Ford: 6.5' and 8' long bed F150, F250, F350 except flaresides
- Nissan: All Titan models
Use with EZ-Glide Ladder Rack model 252-3-02, 252-3-01, or 252.Learn More
- Self-rising, reinforced lid has dual gas spring lid lifts for easier access
- Recessed hinge allows the lid to fully open when the chest is placed against the bed wall or another object
- 16-gauge steel reinforced construction and heavily-reinforced lid for improved strength and security
- Tapered lower front wall will fit better in trucks with all types of bed liners
- 3-compartment sliding tray provides convenient storage for hand tools and small parts
- Bottom bolsters raise the chest above standing water
- Full weather stripping creates a tight seal against moisture and dust Learn More
This heavy-duty Northern Tool + Equipment in-frame truck box is designed for mounting between the frame and truck rails to provide low-profile access for storage of heavy chains, binders and tie-down straps. Features rugged 0.100 diamond plate aluminum construction. U.S.A. Application: To provide low-profile access for storage of heavy chains, binders and tie-down straps, Dimensions L x W x H (in.): 24 x 36 x 10, Handle Type: Pad Lock, Finish Type: Smooth body aluminum finish with diamond plate open lid, Mount Type: Between frame and truck rails.Learn More