Tool Boxes & Cabinets and Benches
Used On Crew Cab - 1999 And Up - F250 And F350 Trucks With No Camper Or Utility Shell On Truck - 13 Ga - Marine-grade Powder Coat Finish - Load Capacity 1700 LbLearn More
Delta PRO Trailer Tongue Boxes provide superior security and weather-tight storage. Deep recessed hinge allows the box to fully open when placed against a rail or trailer wall.
- Rugged construction and beveled edge lid for greater strength and security; steel models made of heavy 16-gauge steel
- Offset gas spring lid lift allows easier access for loading and unloading from the driver's side
- Fully-adjustable lid striker helps maintain a tight, moisture-resistant seal between the lid and body
- Leak-proof stainless steel paddle handles prevent moisture from getting inside
- Full weather stripping seals out moisture and dust
- Aluminum models available with bright or diamond brite black finish
Underbody boxes provide a secure, convenient storage solution.
- Specially designed channel and bulb seal is designed to keep water out
- Coated steel cable allows door to remain open at a 90 degree angle
- Locking stainless steel flush mount T-handle provides security
- Lid available in Aluminum or Rhino
- Protected with Rhino Lining
- Sturdy, one-piece, no sag base design
Delta PRO Steel Innersides utilize the same Gear-Lock system, self-centering latch pin, reinforced lid and high-strength body Design as the Crossovers. They mount on the top of the bed side walls and are ideal for storing longer tools and equipment. Innersides help keep the bed free for storing bulky items. Combine Innersides with a Crossover to create a wrap-around storage system.
- Gear-Lock dual rotary locking system operates like a ratchet to lock the lid down tighter
- Self-aligning latch pin pivots from side-to-side to engage with the Gear-Lock System; no adjustments required
- 3-Layer Laminated RSL Rigid Structural Lid has a reverse beveled edge liner and an inner layer of rigid foam insulation to create the most rigid, strongest aluminum lid we've tested
- Reinforced high-strength body resists cargo damage and protects lock system
- Heavy-duty, reliable Posi-Lift gas springs automatically opens the lid for easier, faster access
- Full-length storage bin provides quick and easy access to hand tools and parts
- Full weather stripping creates a tight seal against moisture and dust
- Built-in full-length storage compartment for small tools and parts
- All models available with diamond black finish Learn More
Dee Zee Tool Box - Red Label Chest. Constructed of heavy duty Brite-Tread aluminum. Crown style lid with a full pan double-V stiffener for superior rigidity. Other features: lockable stainless steel paddle handles, dampened gas shocks, closed cell foam gasket, and self-adjusting strikers. Removable plastic tool tray to help keep small items organized.
- Red Label Utility Chest
- Non-Rusting .056 Brite-Tread Aluminum
- Extra Wide Storage To Fit More Gear
- Lockable Stainless Steel Paddle Handle Latch
- Internal Bends Add Superior Body Strength
- Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
- Dampened Gas Shocks Open At A Steady, Controlled Rate
- Crowned Lid With Full Length Hidden Hinge
- Double V-Pan Lid Stiffener Creates Strength And Rigidity
- Self-Adjusting Lid Strikers For Secure Closing
- Front, Back And Bottom Are Bent From A Single Piece Of Aluminum
- L: 60" x W: 24" x H: 18" ; Vol: 14.9 cu. ft.
- W-2: 2.4"; H-1: 15.4"
- Made In USA
- Limited-Lifetime Warranty
Delta Aluminum Transfer tanks are designed for the toughest conditions. Made of heavy-duty .125 tread plate aluminum, the tanks have internal baffles for reinforcing and controlling the flow of the contents when moving. All tanks are pressure tested for leaks.
- All tanks are pressure tested for leaks.
- 2-in reinforced bungs allow convenient use from either side
- Filter system recommended.
- Built-in lifting rings to assist with lifting and moving an empty tank.
- Lockable filler cap and coupler prevent excessive pressure build up.
- Heavy-duty brackets to secure the tank to the truck bed/
- All brackets must be bolted to the truck bed.
- Safety Fill Capacity: 56 Gallons
- Maximum Fill Capacity: 59 Gallons
Fender Well; Drawer Slide; Tool Box; RH[Passenger] Side; L 48 in. x W 8 in. x H 23.25 in. Provides Greater Access To Small Tools. Single Lid Storage Box. 3 Sliding Drawers. .063 Aluminum One Piece Tub And Lid. Stainless Steel Paddle Lock. MicroSeal+ Stripping Seals Out Moisture.Learn More
- Two, 2 inch reinforced bungs
- Pump can be mounted on either side of the tank.
- Built-in lifting rings assist with lifting empty tank.
- Heavy-duty mounting brackets secures the tank to the truck bed.
- Locakable filter cap and coupler prevents excessive pressure build-up.
- Safety Fill Level: 96 Gallons
- Maximum Fill Level: 107 Gallons
- Dimensions (Length x Width x Height): 45 1/4" x 24" x 23 1/4"
Delta CHAMPION GL Low-Profile Crossovers are designed to provide a clean, custom appearance complementing today's new truck styles. The sleek, low-profile shape improves the view of the rear of the truck. Low-profile models offer the same superior security and important features of standard-height Delta Champion Crossovers.
- Patented Gear-Lock Latch on the stainless steel paddle handle provides premium security and weather resistance when the lid is latched shut
- 3-Layer Laminated RSL Rigid Structural Lid has a reverse beveled edge liner and an inner layer of rigid foam insulation to create the most rigid, strongest aluminum lid that Delta's ever made
- Adjustable lid strikers lock the lid down tight for superior security
- Reinforced body resists cargo damage and protects the lock system
- Gas spring lid lifts raise the lid when unlatched for easier access
- Leak-proof stainless steel paddle handles prevent moisture from entering
- Full weather stripping creates a tight, moisture resistant seal
- Available with black finish (model number 1-350002)