Tool Boxes & Cabinets and Benches
Delta PRO Aluminum Innersides utilize the same Gear-Lock system, self-centering latch pin, reinforced lid and high-strength body Design as the Crossovers. They mount on the top of the bed side walls and are ideal for storing longer tools and equipment. Innersides help keep the bed free for storing bulky items. Combine Innersides with a Crossover to create a wrap-around storage system.
- Gear-Lock dual rotary locking system operates like a ratchet to lock the lid down tighter
- Self-aligning latch pin pivots from side-to-side to engage with the Gear-Lock System; no adjustments required
- 3-Layer Laminated RSL Rigid Structural Lid has a reverse beveled edge liner and an inner layer of rigid foam insulation to create the most rigid, strongest aluminum lid we've tested
- Reinforced high-strength body resists cargo damage and protects lock system
- Heavy-duty, reliable Posi-Lift gas springs automatically opens the lid for easier, faster access
- Full-length storage bin provides quick and easy access to hand tools and parts
- Full weather stripping creates a tight seal against moisture and dust
- Built-in full-length storage compartment for small tools and parts
- All models available with diamond black finish Learn More
This Full Locker deep-format unit, is designed specifically for use with the 56-Inch series of boxes, and features two fixed shelves, and a registered key lock. Fits on all 24-Inch Deep Tool Cabinets 2 fixed shelves Can be added to the right or left side of cabinet Registered key lock Scratch resistant powder coat painLearn More
$294.97Rugged 12-gauge, reinforced cold-rolled steel doors and MIG-welded, reinforced 14-gauge steel bodies.Product Features
- Industrial grade steel hinges
- Wide, surround rain gutter with auto-style bulb weather stripping
- Three-point locking system
- Commercial rotating T-handle
- Aircraft cable door supports
- Reinforcing cross-hatch pattern
Chest Box; Standard; L 48 in. x W 19.25 in. x H 18 in. Designed To Fit Against Back Of Cab. Stainless Steel Lock Handles For Strength/Security. Aluminum Lid Supports Heavy Loads. Self Closing Struts. MicroSeal Stripping Seals Out Moisture. Lid Opens 90 Degree For Easy Loading. Aluminum One Piece Tub and Lid. Patented Fully Foamed Lid.Learn More
- Two, 2 inch reinforced bungs
- Pump can be mounted on either side of the tank.
- Built-in lifting rings assist with lifting empty tank.
- Heavy-duty mounting brackets secures the tank to the truck bed.
- Locakable filter cap and coupler prevents excessive pressure build-up.
- Safety Fill Level: 37 Gallons
- Maximum Fill Level: 42 Gallons
- Dimensions (Length x Width x Height): 59-5/8 " x 19" x 9"
This heavy-duty Northern Tool + Equipment in-frame truck box is designed for mounting between the frame and truck rails to provide low-profile access for storage of heavy chains, binders and tie-down straps. Features rugged 0.100 diamond plate aluminum construction. U.S.A. Application: To provide low-profile access for storage of heavy chains, binders and tie-down straps, Dimensions L x W x H (in.): 24 x 18 x 8, Handle Type: Padlock style, Finish Type: Smooth body aluminum finish with diamond plate open lid, Mount Type: Between frame and truck rails Padlock loopLearn More
Chest Box; Standard; L 30 in. x W 19.25 in. x H 18 in. Designed To Fit Against Back Of Cab. Stainless Steel Lock Handles For Strength/Security. Aluminum Lid Supports Heavy Loads. Self Closing Struts. MicroSeal Stripping Seals Out Moisture. Lid Opens 90 Degree For Easy Loading. Aluminum One Piece Tub and Lid. Patented Fully Foamed Lid.Learn More
Additional fees apply. UWS Slim Line Series offers full-size features for smaller truck beds by using the limited space in front of the wheel well. The toolbox sits along the truck bed 4" above the rails, fitting snugly behind the cab. The insulated, beveled, single lid opens to a full 90 degrees with the help of two super-duty lift cylinders, which raise the lid and hold it open as you load and unload your gear. The divided tool tray provides additional storage for smaller items, ensuring that they are readily available. Model TBSD-72-SL Slim Line Series Deep Truck Bed Deep Toolbox by United Welding Services (UWS) and ThulLearn More
- Fits full size trucks - 8' bed with crossover or 6' bed without crossover
- Fits mid/mini size trucks - 7' bed with crossover or 6' bed without crossover
- 48" L x 12.75" W x 10" H
- 3 cubic feet