Tool Boxes & Cabinets and Benches
Delta PRO Aluminum and Steel Underbed Boxes are built for protecting heavy tools and equipment in the toughest conditions. An extended rain gutter channels water around the outside of the door opening. Durable weather stripping forms a tight seal to prevent moisture from entering. 3-Point locking system draws the door tight against the weather stripping surrounding the door opening. It locks the door at the top and on both sides. Aluminum Underbed Boxes are made of high-strength .100-gauge tread plate aluminum.
- High-strength hinges stand up to heavy use and attempted break-ins
- 3/4-in wide rain gutter surrounds the door opening to channel moisture away from the interior to protect the contents
- 3-point locking System locks the door at the top and on both sides for greater strength and security
- Extra heavy-duty construction withstands the toughest conditions for long-term use
- Rotating stainless steel handle is leak-proof to prevent moisture from entering
- Plastic coated galvanized steel aircraft cable door supports are mounted on stainless steel shoulder rivets to prevent twisting; opened door will support a 300 lbs. load Learn More
Underbody Truck boxes provide a secure, convenient storage solution.
- 60" L X 18.75" W x 18"H
- Specially designed channel keeps water out
- Steel chain supports allow door to remain open at a 90 degree angle
- Locking stainless steel T-handle provides security
- Bulb channel prevents leaks
- Sturdy 12 gauge steel door
- Available in White or Black finish
- 14 gauge steel
- Paints are electrostatically applied to maximize resistance to abrasion and corrosion
- Sturdy, one-piece, no sag base design
Adjustable Shelf Inserts - available separately
- Available for 24", 36" and 48" underbodies
- Shelf divides compartment for increased organization
- Adjusts to one of three positions
- Constructed of sturdy 16 gauge galvanized steel
- Assembles in less than 10 minutes
- Fits most competitors' underbodies
Delta SteelTransfer tanks are designed for the toughest conditions. Made of heavy-duty .125 tread plate steel, the tanks have internal baffles for reinforcing and controlling the flow of the contents when moving. All tanks are pressure tested for leaks.
- All tanks are pressure tested for leaks.
- 2-in reinforced bungs allow convenient use from either side.
- Filter system recommended.
- Built-in lifting rings to assist with lifting and moving an empty tank.
- Lockable filler cap and coupler prevent excessive pressure build up.
- Heavy-duty brackets to secure the tank to the truck bed.
- All brackets must be bolted to the truck bed.
- Safety Fill Capacity: 103 Gallons
- Maximum Fill Capacity: 109 Gallons
This All-Purpose Rack has a specially designed mounting leg that fully adjusts to the contour of the van roof, for secure through-the-roof mounting.Learn More
- Two, 2 inch reinforced bungs
- Pump can be mounted on either side of the tank.
- Built-in lifting rings assist with lifting empty tank.
- Heavy-duty mounting brackets secures the tank to the truck bed.
- Locakable filter cap and coupler prevents excessive pressure build-up.
- Safety Fill Level: 96 Gallons
- Maximum Fill Level: 107 Gallons
- Dimensions (Length x Width x Height): 45 1/4" x 24" x 23 1/4"
- Dimensions: 22½"W x14"H x 13"D
- Weight: 42lbs
- Warranty: 5 Year Limited Warranty
- Paint Type: Powder Coated
- Powder coat finish
- Holds either metric or S.A.E. tools
- Lid secures tools in position when closed
- Locking latch secures tools from unauthorized use
- Lock cylinder has double-cut keys for easier locking and unlocking
- Weather stripping creates a tight seal against dust and moisture
- Gas spring raises lid when unlatched for easy tool access
- Sturdy side handles make moving easy
- Tool inventory at a glance
- 5 Year Limited Warranty
DELTA Aluminum Mid-Lid Design Crossover offers a 40% larger opening than Gull Wing models. Lids lock, unlock and open from the same side. Lid reinforced with new RSL™ Rigid Structural Lid Bolster for superior strength. Adjustable lid strikers keep the lid locked down tight for improved security. High-strength body design resists cargo damage and protects the locking mechanism. Leak-proof stainless steel paddle handles prevent moisture from entering. Self-rising lids with dual gas spring lid lifts. Mid-Size. Black.Learn More
This heavy-duty Northern Tool + Equipment in-frame truck box is designed for mounting between the frame and truck rails to provide low-profile access for storage of heavy chains, binders and tie-down straps. Features rugged 0.100 diamond plate aluminum construction. U.S.A. Application: To provide low-profile access for storage of heavy chains, binders and tie-down straps, Dimensions L x W x H (in.): 24 x 18 x 8, Handle Type: Padlock style, Finish Type: Smooth body aluminum finish with diamond plate open lid, Mount Type: Between frame and truck rails Padlock loopLearn More
The TALG2072 is full size 0.060 in. aluminum, gull wing cross bed truck tool box with a diamond plated finish. Fits wider bed trucks and deeper well. Bright or Black finish with dual lid. Strong double latch paddle handle to protect your valuables.
- Fits most full size trucks
- Dual lid
- Made of a one-piece no sag base making it sturdier and the paints are electro statically applied to maximize resistance to abrasion and corrosion
- Bright finish