Tool Boxes & Cabinets and Benches
This Full Locker deep-format unit, is designed specifically for use with the 56-Inch series of boxes, and features two fixed shelves, and a registered key lock. Fits on all 24-Inch Deep Tool Cabinets 2 fixed shelves Can be added to the right or left side of cabinet Registered key lock Scratch resistant powder coat paint finishLearn More
The TALF568DPBBK is a mid-size Aluminum cross bed truck tool box. Made with a deeper design for additional capacity. This box is made of .060 Aluminum rust resistance material. Available in bright diamond plate or black power coat. Fits most mid-size trucks.
- Allows storage under the box.
- Paints are electro statically applied to maximize resistance to abrasion and corrosion.
- Ethafoam mounting strips protect truck's finish.
- Sturdy, one-piece, no sag base design.
- Deeper design for additional capacity
- Push button on each end of easy access
- Bright/Black diamond plated finish
- Measures 60-inches (L) “inside flatbed” by 20.5-inches (H) by 15.5-inches (W)
Single Lid Series; Tool Box; L 58 in. x W 19.25 in. x H 13.5 in. Fully Foamed Lid Prevents Bending/Warping. Stainless Steel Lock Handles For Strength/Security. Aluminum Lid Supports Heavy Loads. Self Closing Struts Automatically Close. MicroSeal+ Stripping Seals Out Moisture. Lid Opens 90 Degree For Easy Loading. 3 Compartment Sliding Tray. 2 Built In Tool TrayLearn More
Dee Zee Tool Box - Red Label Chest. Constructed of heavy duty Brite-Tread aluminum. Crown style lid with a full pan double-V stiffener for superior rigidity. Other features: lockable stainless steel paddle handles, dampened gas shocks, closed cell foam gasket, and self-adjusting strikers. Removable plastic tool tray to help keep small items organized.
- Red Label Utility Chest
- Non-Rusting .056 Brite-Tread Aluminum
- Slanted Front To Avoid The Wheel Wells
- Lockable Stainless Steel Paddle Handle Latch
- Internal Bends Add Superior Body Strength
- Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
- Dampened Gas Shocks Open At A Steady, Controlled Rate
- Crowned Lid With Full Length Hidden Hinge
- Double V-Pan Lid Stiffener Creates Strength And Rigidity
- Removable Plastic Tool Tray To Keep Smaller Items Organized
- Front, Back And Bottom Are Bent From A Single Piece Of Aluminum
- L:56" x W: 19" x H: 16" ; Vol: 8.9 cu. ft.
- W-2: 2.4"; H-1: 13.1"
- Made In USA
- Limited-Lifetime Warranty
Dee Zee Tool Box - Underbed style boxes add storage to your semi cab or trailer. Made from heavy duty Brite-Tread aluminum. Locking stainless steel T-handle latches. C-Channel leak-proof design, incorporating a one-piece neoprene rubber bulb seal. Use DB-2502 mounting kit (sold separately)
- Heavy Truck Underbed Box
- Non-Rusting .090 Brite-Tread Aluminum
- Raw Aluminum Finish
- Lockable Stainless Steel T-Handle Latch
- Drop Down Doors For Easy Access
- Safety Chains To Support The Double Doors
- Water Resistant C-Channel And Bulb Seal To Help Keep The Elements Out
- Mounting Brackets Sold Separately
- L: 24" x W: 24" x H: 18" ; Vol: 4.5 cu. ft.
- Made In USA
- Limited-Lifetime Warranty
$294.97Rugged 12-gauge, reinforced cold-rolled steel doors and MIG-welded, reinforced 14-gauge steel bodies.Product Features
- Industrial grade steel hinges
- Wide, surround rain gutter with auto-style bulb weather stripping
- Three-point locking system
- Commercial rotating T-handle
- Aircraft cable door supports
- Reinforcing cross-hatch pattern
This heavy-duty Northern Tool + Equipment in-frame truck box is designed for mounting between the frame and truck rails to provide low-profile access for storage of heavy chains, binders and tie-down straps. Features rugged 0.100 diamond plate aluminum construction. U.S.A. Application: To provide low-profile access for storage of heavy chains, binders and tie-down straps, Dimensions L x W x H (in.): 24 x 22 x 10, Handle Type: T-Handle, Finish Type: Smooth body aluminum finish with diamond plate open lid, Mount Type: Between frame and truck rails.Learn More
- All-welded, adjustable height legs (29"H - 41"H on 1" increments)
- Painted Steel Bench Top
- Includes full-length stringer
- Accessory Kit is available, which includes backstop, end stops and lower shelf
- Made in the U.S.A.
- Dimensions: 48" W x 29" D x 48" H
- Choose from 20 different finish colors