Tool Boxes & Cabinets and Benches
Dee Zee Transfer Tanks - A safe and convenient means for transporting non-flammable liquids. Constructed of heavy gauge Brite-Tread aluminum. Radius curve design eliminates key weld pressure points. Tanks feature 3 stability baffles, lockable cap, .375" drainage plug, and venting coupler. Tanks are intended for private use (non-commercial). Not designed for use as an auxiliary fuel system. Not for use with gasoline. Does not meet title 49 of the United Stated Federal Registry governing transportation.
- Specialty Series Transfer Tank
- Non-Rusting .125 Brite-Tread Aluminum
- Radius Curve Eliminates Weld Pressure Points
- Includes Cap And Coupler For Venting
- 3 Stability Baffles And Drain Plug
- Mounting Tabs To Secure To The Truck Bed
- Volume: 38 Gallon Capacity
- Skinny Rectangle - L: 59.5" x W: 9" x H: 19"
- Made In USA
- Limited-Lifetime Warranty
AUXILIARY FUEL TRANSFER TANKS:
Regular stops to fill up your vehicle’s fuel tank can eat up your work day or extend your drive time on road trips with the 5th wheel trailer. Dee Zee Auxiliary Transfer Tanks are tested and certified to hold diesel fuel for the purpose to transfer it directly into your vehicle’s fuel tank. With a sophisticated connector kit (sold separately), you can skip the next exit by pulling diesel fuel directly from your truck bed.
Auxiliary Tanks have all the benefits of Dee Zee’s Transfer Tanks with these added features:
- Full Sized and Fully Welded Baffles Add Extra Strength
- Hydrostatically Pressure Tested to 29 psi
- Meets Federal Motor Carrier Safety Administration Requirements For Diesel Auxiliary Tanks
- Meets Federal DOT Requirements for UN31A and UN31B Tanks
- Always Check Local Regulations and Vehicle Warranty Before Altering Your OEM Fuel System
- Connector Fuel Line Kits Sold Separately
- V-Groove Door Frame reinforces the body, creates a larger door opening & has wider surface for weather stripping
- Beveled edges on the high-strength door fit tight against the V-Groove Frame to resist break-ins & moisture.
- 16 Gauge Aluminum Continuous Hinge provides superior strength and durability.
- Quick Release Keyway Connectors allow the door to drop down for easier access for storing bulky items
- 3-Point Locking System locks the door at the top and both sides for superior strength and security.
- One-Piece Housing protects the locking system and strengthens the door.
- Leak-Proof Stainless Steel Rotating T-Handle is made for rugged use and reliability. Coated, Galvanized Steel Aircraft Cable Door Supports pivot on a shoulder rivet to prevent twisting.
- 12 Gauge cold-rolled steel door and 14 Gauge steel body stand up to the roughest conditions.
- 3-Yr. Limited Warranty Learn More
- Rugged construction and beveled edge lid for greater strength and security; steel models made of heavy 16-gauge steel
- Offset gas spring lid lift allows easier access for loading and unloading from the driver's side
- Fully-adjustable lid striker helps maintain a tight, moisture-resistant seal between the lid and body
- Leak-proof stainless steel paddle handles prevent moisture from getting inside
- Full weather stripping seals out moisture and dust
- Steel models have Armor-Brite white or diamond black finish Learn More
- Dimensions: 26"W x 17 3/8"D x 21 1/2"H
- Weight: 70lbs
- Warranty: 5 Year Limited Warranty
- Paint Type: Powder Coat
- 16 Ga. steel construction on top chest with welded seams, no spot welding
- Top chest holds both metric and S.A.E. tools
- Lid secures tools in postion when closed
- Weather stripping creates a tight seal against dust and moisture
- Gas spring raises lid when unlatched for easy tool access
- Chrome plated side handles on both sides of chest
- Locking latch secures tools from unauthorized use
- Powder coated in a tough scratch resistance textured powder paint
- Full width wrap around aluminum drawer pull
- Premium drawer liner
- Tool inventory at a glance
International VRT-4210OR 42-inch 10 Drawer Orange Tool Chest with Heavy Duty Ball Bearing Drawer Slides$392.97
International VRT-4210OR 42-Inch 10 Drawer Orange Tool Chest with Heavy Duty Ball Bearing Drawer Slides. 45mm ball bearing drawer slides with strong d tente to prevent drawers from accidentally opening. Full width drawer pulls with strong d tentes. All drawers come equipped with pre cut drawer liners. Full length brushed aluminum drawer trim. Aluminum corner trim provides added protectionLearn More
Ball Bearing drawer slides on all drawers. 5 full width drawers with aluminum drawer pulls. Double wall construction. Heavy duty casters; 5-Inch by 2-Inch. Scratch resistant powder coat paint finish.Learn More
Unique Chests for 4-door trucks provide extra-wide storage space. Chest sits on the bed floor between the wheel wells. The top of the chest is flush or below the side walls. Ends of chest extend over the wheel wells providing extra storage for small items.
- 3-Layer Laminated RSL Rigid Structural Lid has a reverse beveled edge liner and an inner layer of rigid foam insulation to create the most rigid, strongest aluminum lid we've tested
- Adjustable lid strikers lock the lid down tight for superior security
- Reinforced body resists cargo damage and protects the lock system
- Gas spring lid lifts raise the lid when unlatched for easier access
- Leak-proof stainless steel paddle handles prevent moisture from entering
- Full weather stripping creates a tight, moisture resistant seal
- Both models available with diamond black finish Learn More
Use with EZ-Glide Ladder Rack model 252-3-02, 252-3-01, or 252.Learn More
Flush mount design provides a clean look and an unobstructed view of the road.
- Angled at bottom of front and side walls to accommodate sloped bed walls and wheel wells.
- Offset lid construction allows lid to open fully without back wall interference.
- Protected with Rhino Lining
- Ethafoam mounting strips protect truck's finish
- Sturdy, one-piece, no sag base design
- Domed lid adds strength and aerodynamics
- Gas cylinders allow easy access
- Strong, lockable paddle handles protect valuables
- Weatherproof gasket prevents leakage