Tool Boxes & Cabinets and Benches
- Pin releases to allow drawer to be removed when necessary
- Thumb-controlled latch release is easy to reach and offers quick, convenient access to contents; latch holds drawer tight when it is closed
- Handles are protected from damage inside recessed area
- Industrial-grade aluminum construction is fully welded for strength; .125 aluminum top will support 200-pound load
- Movable plastic dividers to easily change the lengths of storage compartments; additional dividers Model 1410980 can be purchased
Delta PRO Aluminum Crossovers provide superior security for tools and equipment. The combination of our Gear-Lock Dual Rotary Locking System, RSL Rigid Structural Lid, and our high-strength body will resist over 1,000 pounds of prying for to break in.
- Gear-Lock self-adjusting dual rotary locking system always latches and closes for superior security
- Self-aligning latch pin pivots from side-to-side to engage with the Gear-Lock System; no adjustments required
- 3-Layer Laminated RSL Rigid Structural Lid has a reverse beveled edge liner and an inner layer of rigid foam insulation to create the most rigid, strongest aluminum lid we've tested
- Reinforced high-strength body and full-wide lock console resists cargo damage and protects the lock system
- End-mounted push buttons provide easy access; lid locks and unlocks from either side for security and safety
- Heavy-duty guards protect the vertical-action gas spring lid lifts and help ensure long-term durability
- Built-in storage bin on both ends and 4-compartment sliding tray for convenient hand tool and small item storage
- One-piece, heavy-duty 14 gauge steel tubis designed to support extra heavy loads, absorb tool drops and prevent leakage
- Patented fully foamed lid creates a rigid wall between outer steel layers for added strength, rigidity and solid, secure lid closure
- Quick-pull™ handle for easier one-hand access and key lock protection
- Rotary locking system with stainless steel housing for superior strength and security
- Connecting Rod Enclosurehelps prevent box contents from bending or jamming the locking system
- DuraCoat™ powdercoat helps resist abrasion and corrosion over time
- Heavy-duty gas struts opens lid to a full 90° for easy loading and unloading of tools and equipment
- MicroSeal™ Stripping helps seal out moisture, dust and dirt
- 2 Built-in Tool Trays and Screwdriver Holders extra strength and rigidity to the box?also makes tools immediately accessible
- 3-Compartment Sliding Tray or convenient small item storage and retrieva
- Crimp free/drill free install mounting slots and brackets for easy and quick mounting
- Full-length piano hinge improves opening and closing and adds theft protectionLearn More
Out of stock
Delta PRO Aluminum and Steel Underbed Boxes are built for protecting heavy tools and equipment in the toughest conditions. An extended rain gutter channels water around the outside of the door opening. Durable weather stripping forms a tight seal to prevent moisture from entering. 3-Point locking system draws the door tight against the weather stripping surrounding the door opening. It locks the door at the top and on both sides.Aluminum Underbed Boxes are made of high-strength .100-gauge tread plate aluminum.
- High-strength hinges stand up to heavy use and attempted break-ins
- 3/4-in wide rain gutter surrounds the door opening to channel moisture away from the interior to protect the contents
- 3-point locking System locks the door at the top and on both sides for greater strength and security
- Extra heavy-duty construction withstands the toughest conditions for long-term use
- Rotating stainless steel handle is leak-proof to prevent moisture from entering
- Plastic coated galvanized steel aircraft cable door supports are mounted on stainless steel shoulder rivets to prevent twisting; opened door will support a 300-pound load
- Automotive EPDM bulb-style weather stripping forms a moisture-proof seal between the rain gutter and interior of the door Learn More
- High-strength beveled edge lid reinforced with full-length bolsters
- Recessed hinge allows the lid to fully open when the chest is placed against the bed wall or another object
- Sliding tray for small tool and parts storage
- Model 871980 fits wide bed fullsize trucks and has bottom skit bolsters
- Leak-proof stainless steel paddle handles and full weather stripping help seal out moisture and dust
- Taper lower front panel for a better fit in trucks with bed liners
- Bottom bolsters raise the chest above standing water in the bed to protect the contents Learn More
- Self-adjusting rotary Gear-Lock II locking system
- Self-aligning latch hoop
- Gas spring guards and 90 Degrees lid opening
- Deep, beveled edge reinforced lid
- Built-in storage bin on both ends
- Lift-out tool tray
- Drill-resistant round push buttons
- Wide EPDM Live Cell automotive bulb-style weather stripping
- New Armor-Brite tough powder paint finish
Secure Lock Series; Single Lid Tool Box; L 72 in. x W 19.25 in. x H 19.5 in. ; Silver; Low Profile; Deep; w/Rail. Fully Foamed Lid Prevents Bending/Warping. Oversized Twist Handle For Max Security. Aluminum Lid Supports Heavy Loads. Self Closing Struts Automatically Close. MicroSeal+ Stripping Seals Out Moisture. Lid Opens 90 Degree For Easy Loading. 3 Compartment Sliding Tray. 2 Built In Tool Trays.Learn More
Aluminum Top Rail Boxes Professional Top Rail Mount boxes have a double box design to provide additional storage without losing valuable truck bed space. Easily mounted to the bed rail of most trucks and includes water resistant gaskets.
- Designed for strength with weather proof gaskets
- Front opening protects contents from the elements
- Recessed Stainless Steel T-Handle
- Available in several sizes: 72", 90" and 96"
- Available in diamond-tread Bright finish
- Sturdy .060" Aluminum resists rust
- Paints are electrostatically applied to maximize resistance to abrasion and corrosion
Dimensions: H: 18 1/8 W: 18 1/4 L: 48 1/8
Weight (lbs.): 100
Cubic feet: 9
- Brushed stainless steel paddle handle, with rotary style latch mechanism features a two position latch that prevents the door from inadvertently opening.
- Aluminum doors swing down for easy access and a full view of the contents. Opened door is supported by aircraft-type cables with swedged fittings which can be removed to allow for a fully open swing down position.
- Positive weather seal protects tools and materials stored inside from road dirt and weather.
Dee Zee Tool Box - Blue Label (Commercial Grade) Single Lid Crossover. Constructed of heavy gauge Brite-Tread aluminum. Black-Tread powder coat, provides a gloss black finish while it protects and prevents oxidation. Large push button with self-adjusting latches. Hidden hinge, gas shocks, Alumaguard strengthening channel, and adjustable strikers on a hat style lid. Removable plastic tool tray to help keep small items organized.
- Blue Label - Commercial Grade Crossover Tool Box
- Non-Rusting Brite-Tread Aluminum
- Protective Gloss Black Powder Coat Finish
- Ergonomically Designed Push Button Latches
- Full V-Pan Lid Stiffener Creates Strength And Rigidity
- Self Adjusting Latches And Adjustable Lid Strikers
- Internal Bends Add Superior Body Strength
- Hat Style Lid And Rubber Bulb Seal Help Resist The Elements
- Removable Plastic Tool Tray To Keep Smaller Items Organized
- L: 69.75 :_mage_bind_var_67 x H: 17.5" ; Vol: 12.8 cu. ft.
- L-1: 60.75 :_mage_bind_var_68; H-2: 12.5"
- Made In USA
- Limited-Lifetime Warranty