This Delta Jobox jobsite tool storage box provides safe storage for all your tools and equipment, and is designed with an internal padlock system that is almost impossible to force or cut open. The box is strong and durable, made with forkliftable, 16-gauge reinforced steel construction with 14 ga. continuous hinges. The tool box also features a rust resistant powder coat finish and smooth hemmed edges to prevent injuries & keep out moisture.
- Site-vault security system
- EZ-Loader caster skid bolster
- Stacked and welded steel hinges
- Heavy duty locking arms
- Bolt cutter proof locking system
- 48" x 24" x27 3/4"
- 15.4 cu. ft usable
- 6-gauge reinforced steel construction
Cable spool holder. Mounts to vehicle floor.
- Dimensions: 42 1/2" H x 19 3/4" W x 16 1/4" L
UWS Drawer Slide Boxes are designed for storage and multipurpose usage with easy configurations. They are made from heavy gauge aluminum which provides long lasting durability. They feature zinc-plated metal sliders with stainless steel ball bearings and three removable bottom drawers. These boxes consist of five precision -injected commercial grade plastic drawers for storage. They are equipped with handle locks and weather-tight seals which provide good security. Model # DS22 Features: Designed for storage and multipurpose usage with easy configurations Made from heavy gauge aluminum Features zinc-plated metal sliders with stainless steel ball bearing Consists of five precision -injected commercial grade plastic drawers Equipped with handle locks and weather-tight sealsLearn More
Works with model 234-3 and 236-3 Quick Clamp Racks to accommodate short ladders and provide additional support.Learn More
Great for securing electronics or expensive equipment. Our new locking storage cabinets feature secure locking D-Handles and tool-less reversible doors. This unit has 2 removable shelves.
- Dimensions: 22" H x 18" W x 16" L
Design that provides a clean look and an unobstructed view of the road. Made of .060 in. aluminum. Offset lid construction allows lid to open fully without back wall interference. Ideal for 5th wheel cargo space. Strong double latch paddle handle to protect valuables.
- 48 inch chest box to use as hitch receiver box
- Made of .056 diamond plate aluminum
- Heavy duty double latch paddle handle to secure valuables
- Bright finish
Delta Champion, Fullsize Aluminum Single Lid Crossover (For Nissan Trucks: All Titan Model) (Bright), 1-232000$259.99
Crossovers are supported across the width of the truck bed by the tops of the bed side rails or walls. Storage space is available on the floor under a Crossover.
Crossovers are available with a Single Lid or Dual Lids. Depending on the product selected, the Dual Lid may be a Mid-Lid, Gull Wing or Rear-Hinged design. All models offer different advantages.
- Gear-Lock locking system resists over 1,000 lbs of break-in force
- Built-in full-length storage compartment provides storage for small parts and tools.
- High-strength body design resists cargo damage and attempted break-ins.
- 3-Layer RSL lid provides superior lid strength and rigidity
- Self-aligning lid latch pins pivot side to side to ensure the lead seals tight
Innerside Boxes mount on top of the bed side rails or walls. The lower part of the box extends down the inside of the side rails or walls.
They are ideal for storing longer tools and can be used individually or in pairs.
Combine a pair of Innerside Boxes with a Crossover to create a wraparound storage system on your truck.
Measure the length of your truck’s side rails or walls to determine the length of Innerside Box you can install on your truck. If used with a Crossover, deduct the space needed for it and allow a 1” space between the Crossover and the Innerside Boxes for the lids to open and close without interference.
Innerside Boxes come with support legs and mounting hardware.
- Gear-Lock Locking System
- Resists over 1000 Lbs of break-in force.
- Built-in Full-length Storage Compartments
- Provides storage for small parts and tools.
- High Strength Body Design
- Resists cargo damages and attempted break-ins.
- 3 Layer RSL Lid
- Provides superior lids strength and rigidity
- Self aligning lid latch pins pivot side to side to ensure the lid seals tight.
Delta Aluminum Portable Utility Chests offer you a combination of important features for improved performance. All models have a recessed hinge allowing the lid to fully open when the chest is against the bed wall. The reinforced lid and adjustable strikers provide superior security. Full weather stripping and leak-proof paddle handles protect the contents from moisture. 49-in and 57-in long models are also available with diamond black finish.
- Recessed hinge allows the lid to fully open when the chest is placed against the bed wall or another object
- High-strength body with wide top flanges resist damage and protect the lock system
- Lid reinforced with pan-style bolster for rigidity and strength for improved security
- Self-rising lid with gas spring lid lift for more convenient loading and unloading
- Leak-proof stainless steel paddle handles and full weather stripping help seal out moisture and dust
- Wide, high-strength lifting handles for easily moving the chest Learn More
Top mount for efficient truck bed use and easily accessible storage. Built for strength. Weather proof gaskets. Front opening protects contents from the elements. Available in several sizes to fit most trucks.
- Locking stainless steel flush mount T-handles provide security
- 16 gauge steel
- Paints are electrostatically applied to maximize resistance to abrasion and corrosion
- Sturdy, one-piece, no sag base design
- Dimensions: 12.75" W x 72" L x 16" H