McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

ORDER BY PHONE:

1-800-561-1752

7AM - 7PM CST 7 Days a Week

SPECIAL SALES & COUPONS!

Subscribe to receive members-only deals in your email

FREE SHIPPING*

ON ORDERS $99+

View Details

Welding

Welding

Items 1-10 of 32

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid List

Set Ascending Direction
  1. Hobart Handler 140 MIG Welder 115 Volt, 140 Amp, #500559

    Hobart Handler 140 MIG Welder 115 Volt, 140 Amp, #500559

    4.5
    15
    $499.99

    The Handler 140 operates off 115 volt standard household current for maximum versatility. Comes ready to weld with or without shielding gas, no additional kit required. With an amperage output range of 25 - 140, it easily handles a broad selection of solid mild steel or stainless, flux cored and aluminum wires.

    Summary

    • Comfortable 10 ft. (3 m) H100S2-10 MIG welding gun
    • Built-in gas valve
    • Regulator and gas hose
    • Power cord with plug
    • 10 ft. (3 m) work cable with clamp
    • Sample spool of .030 in. (0.8 mm) self-shielded flux cored welding wire
    • 8 in (203 mm) wire spool adapter
    • Extra .030 in. (0.8 mm) contact tips

    Features

    • Welds 24 gauge up to 1/4 inch in steel
    • Proven built-in wire feeder with quick-release drive roll lever
    • Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding.
    • Four output voltage settings with wire feed tracking provide quick and easy adjustment for different materials and thickness.
    • Easy access to polarity changeover includes storage holes for spare tips
    • Dual groove drive rolls make it easy to switch between .023/.025 in. (0.6 mm) and .030 - .035 in. (0.8 - 0.9 mm) wire
    • Self-resetting thermal overload and motor protection

    Specifications

    • Rated Output at 20% Duty: 90A @ 18.5 VDC
    • Cycle: 63 A @ 21 VDC (CSA Rating)
    • Current Range: 25 - 140 Amps
    • Max Open Circuit Voltage: 28 Volts
    • Wire Feed Speed Range with load: 40 - 700 Inches per Minute
    • Wire Feed Speed Range w/o load: 50 - 740 Inches per Minute
    • Amps Input @ 115V: 20 (15 is CSA rating)
    • Rated Load, 60 KVA: 2.9 (2.2 is CSA rating)
    • Hertz KW: 2.5 (1.77 is CSA rating

    Dimensions

    • Height: 12-3/8"
    • Width: 10-5/8"
    • Depth: 19-1/2"

    Net Weight: 57 lbs

    Learn More
  2. Hobart AirForce 12ci 115V Portable Air Plasma Cutter 500564

    Hobart AirForce 12ci 115V Portable Air Plasma Cutter 500564

    5.0
    1
    $789.99

    Need to cut steel? Thinking about an oxy acetylene cutting torch to do the job? Consider a plasma cutter. This simple technology uses an electrical arc and compressed air to cut steel, aluminum, and other conductive metals.

    The AirForce 12ci is powered by standard household voltage (115 VAC) and comes ready to cut right out of the box—just pull the trigger. It excels at cutting sheet metal and 1/8-inch mild steel, and can even sever 1/4-inch mild steel. The built-in air compressor and lightweight inverter power supply make this plasma cutter the most convenient, totally portable cutting system available.

    Compared to the complexities of an oxy fuel cutting torch system, plasma cutting is easy:

    • Cuts faster than oxy fuel
    • More precise cut, thinner kerf, less slag to clean up
    • Smaller heat-affected zone for less warping
    • No gas pressure settings or flame tuning needed
    • No preheating of metal prior to cutting
    • No pressurized gas cylinders to transport
    • No worries about running out of gas on the job
    • No expense for gas refills... ever

    The AirForce 12ci comes ready to cut out of the box, with extra replacement tips and a convenient cable management strap for easy transportation. Just pull the trigger and cut.

    Features:

    • New Inverter Design - Powerful cutting ability in a compact, lightweight package. Weighs only 27 lbs.
    • Built-in Air Compressor - Internal piston-driven air compressor makes the system highly portable. No additional compressor to purchase or transport. Pressure is preset... ready to cut, right out of the box.
    • XT12R Torch - The XT12R torch is designed for increased comfort with an ergonomic trigger safety, more efficient cooling and economical replacement cutting tips.
    • Powered by 120V, 20 amp Circuit - Runs on standard household power. No need for 230 volt hookup by utility company.
    • Post-flow Cooling Circuit - Cools the torch and tip after cutting, extending life of replaceable tip and electrode.
    • Fan-On-Demand - Runs only when needed reducing dust/debris pulled into unit.
    • Diagnostic Lights - LED lights indicate system status for power, temperature, and torch readiness eliminating unnecessary downtime.
    • Thermal Overload Protection - Built to withstand tough working environments. Rated for 35% duty cycle at 104° Fahrenheit. Duty cycle will increase as environmental temperature decreases.

    Comes with:

    • 12 ft. XT12R Hand-Held Torch
    • 12 ft. Work Cable with Clamp
    • Extra Consumables
    • 7 ft. Power Cord with Plug

    Applications:

    • Sheet Metal
    • HVAC
    • Auto Body
    • Farm/Ranch
    • Plumbing
    • Home/Hobby

    Specifications:

    • Rated Output at 35% Duty Cycle: 12 A at 110 VDC
    • Max. Open-Circuit Voltage: 375 VDC
    • Amps Input at Rated Output, 60 Hz:
      • 120 V - 20
      • kVA - 2.27
      • kW - 2.0
    • Plasma Gas Flow/Pressure: Preset with Built-in Compressor
    • Dimensions:
      • H: 10 in (254 mm)
      • W: 8 1/4 in (210 mm)
      • D: 13 in (330 mm)
    • Net Weight: 12ci w/torch: 27 lb (12.3 kg)
    • Ship weight: 30 lb (13.6 kg)
    Learn More
  3. Hobart Handler 190, 230V MIG Welder - Spool Gun Ready 500554

    Hobart Handler 190, 230V MIG Welder - Spool Gun Ready 500554

    5.0
    3
    $694.99

    The Handler® 190 wire feed welder provides a low cost option to weld aluminum with a small frame MIG welder. The spool gun circuitry is already built in so no extra kits or controls are required. With the optional direct plug-in SpoolRunner™ 100 spool gun, you can eliminate feeding problems associated with aluminum wire – it can also be used with mild or stainless steel wire.

    The Handler® 190 features a 7-position voltage switch and infinite wire feed speed control creating a welding arc that more perfectly matches metal thickness and wire diameter than any competitor in its class - less spatter, professional bead appearance, excellent penetration and minimal post-weld cleanup. The Handler 190® operates on 230V input power and offers an output range of 25 to 190 amps, allowing users to weld materials as thin as 24 gauge and as thick as 5/16 inch.

    The optional SpoolRunner™ 100 direct plug-in spool gun is great for welding aluminum – no more wire feed problems! Just plug the SpoolRunner™ 100 into the Handler® 190 and its ready to go!

    Features:

    • 7 voltage selections, enhanced magnetics and infinite wire feed speed control offers easier fine control of the output parameters for improved arc performance with less spatter for a better bead appearance and less cleanup
    • Welds 24 gauge up to 5/16 inch steel
    • Spool gun control circuitry is built-in to the Handler® 190 for the optional SpoolRunner™ 100 direct plug-in spool gun. Alleviates feeding problems with soft aluminum wires. Also useable with mild or stainless steel welding wires.
    • Proven built-in wire feeder with quick-release drive roll lever
    • Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding
    • Easy access to polarity changeover includes storage holes for spare tips
    • Dual groove drive rolls make it easy to switch from one wire size to another. One knurled groove and one smooth groove for .030-.035 in. (0.8-0.9 mm) wire.
    • Self-resetting thermal overload and motor protection

    Comes with:

    • Comfortable 10 ft. (3 m) H100S4-10 welding gun
    • Built-in gas valve
    • Dual gauge regulator and gas hose
    • Power cord with plug
    • 10 ft. (3 m) work cable with clamp
    • Sample spool of .030 in. (0.8 mm) self-shielded flux cored welding wire
    • 8 in (203 mm) wire spool adapter
    • Extra .030 in. (0.8 mm) contact tips
    • Weld set-up chart

    Power:

    • CV
    • DC
    • 1 Phase

    Material Thickness: Welds 24 gauge up to 5/16 inch

    Skill Level: Low

    Applications:

    • Maintenance
    • Construction
    • Auto Body
    • Farm/Ranch
    • Rental
    • Home

    Specifications:

    • Rated Output at 30% Duty Cycle: 130 A at 21.5 VDC
    • Current Range: 25 - 190 A
    • Max. Open-Circuit Voltage: 31 V
    • Wire Feed Speed Range:
      • 40 - 700 IPM
      • 50 - 740 IPM at no load
    • Amps Input at Rated Load, 60 Hz:
      • 230 V - 20.5
      • kVA - 4.7
      • kW - 3.88
    • Dimensions:
      • H: 12-3/8 in (315 mm)
      • W: 10-5/8 in (270 mm)
      • D: 19-1/2 in (495 mm)
    • Net Weight: 68 lb (31 kg)
    Learn More
  4. Hobart Acetylene Tag-A-Long Kit 770500

    Hobart Acetylene Tag-A-Long Kit 770500

    4.2
    2
    $299.99

    This completely portable lightweight oxy-acetylene cutting and welding outfit weighs less than 32 lbs. and is ready to go where you need it. Compact design stores easily for road travel or when not in use. Ideal for general maintenance, farming, shop, and home use. All brass Oxygen and Acetylene regulators provide efficient and dependable control of gasses. Ergonomically balanced high density polyethylene carrier is extremely durable and includes hose wrap and covered accessories storage compartment. Ready to weld up to 3/32” and cut up to ½” with the nozzle and tip included. Welds up to 1 ¼” and cuts up to 6” mild steel with optional, medium duty Victor style tips and nozzles.

    Comes Complete with:

    • (1) Brass Torch Handle with Factory Installed Check Valves
    • (1) Brass Cutting Attachment with Stainless Steel Tubes and Lever
    • (1) #0 Cutting Tip (factory installed in cutting attachment)
    • (1) #0 Welding Tip
    • (1) Flip Front Goggles 2 X 4 ¼” Shade #5
    • (1) Brass Oxygen Compressed Gas Regulator w/ 2” Gauges & T-handles
    • (1) Brass Acetylene Compressed Gas Regulator w/ 2” Gauges & T-handles
    • (1) Tip Cleaner Kit
    • (1) Size 1 MC Style 10cf Acetylene Cylinder (New & Empty)
    • (1) Size 1 20cf Oxygen Cylinder (New & Empty)
    • (1) Tank Wrench (single function)
    • (1) Single Flint Striker
    • (1) 12.5’ Oxy/Fuel Twin Hose 3/16” ID “T” Grade (for all gases)
    • (1) Plastic Tote (Black) with Hose Wrap
    • (1) Instruction Manual
    • (1) New Cylinder Information Sheet
    Learn More
  5. Hobart Champion Elite DC Welder/11,000 Watt AC Generator 500562

    Hobart Champion Elite DC Welder/11,000 Watt AC Generator 500562

    5.0
    2

    Regular Price: $3,299.99

    Special Price: $2,999.99

    Designed to be a jobsite workhorse, the Hobart Champion ELITE combines an 11,000 watt generator with a DC welder for general construction and emergency power applications. It features a rugged, fully enclosed case which provides a protective barrier and lowers noise. All receptacles on the ELITE feature push-button reset circuit breakers. Auxiliary power while welding gives you the capability to run other equipment (lights, grinders) at the same time you are welding. With the quick set current control, it is easy to set up, provides smooth arc starts and maintains optimum arc characteristics. Cables sold separately. 

    Features:

    • DC weld output for smooth arc performance and easy starts
    • Four 120 volt GFCI (20 amp), one 240V (50 amp) and one 120/240 volt (50 amp) receptacles with push-button reset circuit breakers
    • Auxiliary power while welding gives you the capability to run other equipment (lights, grinder) at the same time you are welding
    • Heavy-duty construction with 100% duty cycle, fully-enclosed engine design, large battery, rugged electrical connections and wiring
    • Just under 4 ft long and weighs less than competitive units
    • "No tools" oil change and standard hour meter to help maintain routine scheduled oil servicing
    • Quick set current control - easy to set up and start welding.
    • Auto-idle for greater fuel savings and reduced noise.
    Engine:
    • Kohler 23 HP gasoline engine, 3600 RPM
    • Fuel-efficient, low-maintenance, twin-cylinder, 4-cycle, overhead-valve
    • 12 gallon fuel tank for extended run time
    Processes: Stick (SMAW)

    Skill Level: Moderate 

    Applications:

    • Maintenance
    • Construction
    • Farm/Ranch
    • Rental
    • Home

    Specifications

    • Rated Output at 25V:
      • 225 A at 100% Duty Cycle 
    • Max. Open-Circuit Voltage: 80
    • Welding Amperage Range:
      • 40 - 225 A DC
    • Single-Phase Generator Power: 11,000 W (10 kVa/kW), 60 Hz, 120/240 Vac; 9500 watts continuous while not welding
    • Dimensions:
      • H: 28 in (711 mm)
      • W: 20 in (508 mm)
      • D: 41 in (1041 mm)
    • Net Weight: Kohler: 490 lb (222 kg)

    Customer would be required to pay for the liftgate service, if needed on the shipping costs.

    Learn More
  6. Hobart AirForce 40i 230V Portable Air Plasma Cutter 500566

    Hobart AirForce 40i 230V Portable Air Plasma Cutter 500566

    5.0
    1
    $1,489.99

    Need to cut steel? Thinking about an oxy acetylene cutting torch to do the job? Consider a plasma cutter. This simple technology uses an electrical arc and compressed air to cut steel, aluminum, and other conductive metals.

    The AirForce 40i plasma cutter features an inverter design that is both lightweight and powerful. The product also features an ergonomic trigger safety, more efficient air consumption, and economically priced XT40R torch consumables. The 40i requires 230 V, 50 A input power and compressed air delivery of at least 4.8 scfm @ 90-120 psi. Maximum cutting of mild steel is 7/8 inch at 50% duty cycle for heavy-duty production requirements.

    Compared to the complexities of an oxy fuel cutting torch system, plasma cutting is easy.

    • Cuts faster than oxy fuel
    • More precise cut, thinner kerf, less slag to clean up
    • Smaller heat-affected zone for less warping
    • No gas pressure settings or flame tuning needed
    • No preheating of metal prior to cutting

    Features:

    • XT40R Torch - Designed for increased comfort with an ergonomic trigger safety, more efficient cooling and economical replacement cutting tips.
    • Pilot Arc Controller - Allows you to cut expanded/perforated metals, as well as painted or coated surfaces, without retriggering the torch.
    • Wind Tunnel Technology - Prevents abrasive dust and particles from damaging internal components.
    • Fan-On-Demand - Cooling system operates only when needed reducing power consumption and contaminants drawn into the machine.
    • Power Factor Correction (PFC) Circuitry - Draws up to 30% less amperage for the same cutting range as compared to the competition. PFC expands operators work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops.
    • LVC Line Voltage Compensation - Provides peak performance power under variable input voltage conditions (±15%) for steady and cleaner-ending cuts.
    • Internal Gas/Air Filter and Regulator - Controls amount of usage and flow of air or gas.
    • Starts Without High Frequency - Protects unit by not interfering with or damaging controls or computers.
    • Diagnostic Lights - LED lights for quick troubleshooting of pressure, power and cup situations.
    • Cable Management Strap - Secures torch, work cable and power cord to make transporting easy and convenient.
    • Postflow Cooling Circuit - Extends life of consumables and torch by cooling them with postflow air after trigger is released.
    • Compatible with Engine-Driven Welders - Capable of cutting 3/8–5/8 in. mild steel when powered by an engine-driven welder with a 240 V generator power outlet of 8 kW or more.
    • Hobart's 5/3/1 Industrial Warranty - Five-year manufacturer warranty on transformers, stabilizers and generators; three years on electronics (drive motors, rectifiers); and one year on guns (MIG and plasma torches).

    Comes with:

    • 12-ft. (3.7 m) XT40R hand-held torch
    • 12-ft. (3.7 m) work cable with clamp
    • Extra consumables
    • 10-ft. (3 m) power cord with plug
    • Easy-to-connect, built-in gas/air filter and regulator for extra protection

    Applications:

    • Maintenance
    • Light Construction
    • Prototyping
    • Body Shops/Fabrication

    Specifications:

    • Rated Output at 50% Duty Cycle: 40 A, at 140 VDC
    • Max. Open-Circuit Voltage: 400 V
    • Amps Input at Rated Output, 60 Hz: 208 V -33, 230 V 30
    • kVA: 6.8
    • kW: 6.6
    • Plasma Gas Flow/Pressure: 4.8 CFM (136 L/min) at 90 –120 PSI (621–827 kPA) Recommended
    • Dimensions:
      • H: 11-1/4 in. (286 mm)
      • W: 8-1/4 in. (210 mm)
      • D: 14-1/4 in. (362 mm)
    • Net Weight: 40i w/torch: 31.4 lb (14.2 kg)
    • Ship weight: 35.8 lb (16.2 kg)
    Learn More
  7. Hobart Spoolgun for Ironman 230, 20' 300349

    Hobart Spoolgun for Ironman 230, 20' 300349

    $549.99

    Great for aluminum MIG welding with the IronMan 230 to eliminate feeding problems associated with soft aluminum wire. The Hobart Spool Gun DP-3545-20 is lightweight, compact and well-balanced. This reliable, yet economical gun provides 20 ft (6.1 m) of cable for extended reach.

    Learn More
  8. Hobart Welder 115 & 230V Mig Handler 210MPV 500553

    Hobart Welder 115 & 230V Mig Handler 210MPV 500553

    4.6
    3
    $894.99

    The Handler® 210MVP Multi-Voltage Plug (MVP) provides flexibility to use either 115V or 230V input power. The MVP allows you to connect to 115V or 230V receptacles in a twist, no tools required. Just choose the plug that fits your receptacle, connect to the Handler® 210MVP’s power cord and start welding. The Handler® 210MVP will automatically adjust itself to the correct input power providing superior arc performance regardless of the power source.

    The Handler® 210MVP offers seven output voltage settings (taps) and infinite wire feed speed control making the unit easy to adjust for different materials, thicknesses and wires. When plugged into 115V power, the 210MVP utilizes 4 voltage settings (taps) and has 140 amps of weld output. When plugged into 230V power, you will get all 7 taps and 210 amps of weld output.

    Features:

    • Dual-voltage input (115V/230V) with the MVP plug makes the unit easy to find a place to plug it in.
    • Max 210 Amps output in a small portable case makes transporting to job sites easier and provides power to weld 3/8" steel.
    • 7 voltage selections (230V), 4 voltage selections (115V), enhanced magnetics and infinite wire feed speed control offers easier fine control for improved arc performance with less spatter for a better bead appearance and less cleanup
    • Spool gun control circuitry is built-in to the Handler® 210MVP for the optional SpoolRunner™ 100 direct plug-in spool gun. Alleviates feeding problems with soft aluminum wires. Also useable with mild or stainless steel welding wires.
    • Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding
    • Easy access to polarity changeover includes storage holes for spare tips
    • Dual groove drive rolls make it easy to switch from one wire size to another. One knurled groove and one smooth groove for .030-.035 in. (0.8-0.9 mm) wire.
    • Self-resetting thermal overload and motor protection

    Comes with:

    • Comfortable 10 ft. (3 m) H100S4-10 MIG welding gun
    • Built-in gas valve
    • Dual gauge regulator and gas hose
    • Power cord with plug
    • 10 ft. (3 m) work cable with clamp
    • Sample spool of .030 in. (0.8 mm) self-shielded flux cored welding wire
    • 8 in. (203 mm) wire spool adapter
    • Extra .030 in. (0.8 mm) contact tips
    • Weld set-up chart

    Applications:

    • Maintenance
    • Construction
    • Auto Body
    • Farm/Ranch
    • Boat/Marine
    • Home

    Specifications:

    • Rated Output at 30% Duty Cycle: 150 A at 23 VDC (230V)
    • Rated Output at 20% Duty Cycle: 90 A at 19 VDC (115V)
    • Current Range:
      • 25 - 210 A (230V)
      • 25 - 140 A (115V)
    • Max. Open-Circuit Voltage:
      • 34 V (230V)
      • 28 V (115V)
    • Wire Feed Speed Range:
      • 40 - 680 IPM
      • 60 - 770 IPM at no load
    • Amps Input at Rated Load, 60 Hz:
      • 230 V - 24
      • kVA - 5.4
      • kW - 4.6
    • Amps Input at Rated Load, 60 Hz:
      • 115 V - 20
      • kVA - 2.9
      • kW - 2.5
    • Dimensions:
      • H: 12-3/8 in (315 mm)
      • W: 10-5/8 in (270 mm)
      • D: 19-1/2 in (495 mm)
    • Net Weight: 79 lb (35.8 kg)
    Learn More
  9. Hobart Welder Ironman 230 Mig 500536

    Hobart Welder Ironman 230 Mig 500536

    5.0
    1
    $1,539.99

    The IronMan™ 230 is a total redesign of the full-size MIG platform, outperforming the competition on arc quality, voltage control, duty cycle and value. It delivers 30-250 amps of pure power in a heavy duty cabinet. The arc of the new IronMan™ 230 is optimized to deliver a flawless weld, making spatter and post-weld cleanup almost non-existent. The IronMan™ 230 easily runs aluminum – just add the optional Hobart DP-3545-20 spool gun and you’re ready to weld aluminum from 18 gauge to 1/2".

    For improved feedability with aluminum wires or for extended reach with other wires add the Hobart 3545-20 spool gun with its 20 ft. cable length.

    Features:

    • Welds 24 gauge up to 1/2 inch material in a single pass
    • Excellent aluminum welding with optional Hobart DP-3545-20 spool gun, also provides extended reach with other wires
    • Twelve-tap voltage control allows for a smooth easy-to-control arc
    • Infinite wire feed speed control for precise adjustment of penetration and weld bead shape
    • Comes complete with 200 amp gun and built-in running gear/cylinder rack
    • Unique spool hub makes changing from 2, 10, 33 and 45 lb. wires spools a snap with a tool-less brake tension knob and automatic wire alignment
    • Built-in thermal overload protects the unit
    • Reversible drive rolls: two grooves for two wire sizes on one drive roll. Decreases spare parts and changeover time
    • Hinged door for easy access to wire drive system for spool and drive roll changes
    • Aluminum wire drive system delivers 0 – 700 IPM wire feed speed

    Comes with:

    • 15 ft. (4.6 m), 200 amp MIG gun
    • Regulator/flowmeter
    • 5 ft. (1.5 m) gas hose with fitting
    • 10 ft. (3 m) primary input cable with plug
    • 10 ft. (3 m) work cable with clamp
    • .030/.035 in. dual groove drive roll
    • Extra contact tips
    • Built-in running gear/cylinder rack
    • Weld set-up and parts information chart

    Material Thickness: Welds 24 gauge up to 1/2 inch

    Applications:

    • Maintenance
    • Construction
    • Auto Body
    • Farm/Ranch
    • Rental
    • Home

    Specifications:

    • Rated Output at 60% Duty Cycle: 175 A at 25.5 VDC
    • Current Range: 30 - 250 A
    • Max. Open-Circuit Voltage: 35 V
    • Wire Feed Speed Range: 0 - 700 IPM
    • Amps Input at Rated Load, 60 Hz:
      • 200 V - 37
      • 230 V - 32.5
      • kVA - 7.4
      • kW - 6.3
    • Dimensions:
      • H: 31 ½ in. (800 mm)
      • W: 18 7/8 in (479 mm)
      • D: 36 1/2 in (927 mm)
    • Net Weight: 185 lb (84 kg)
    Learn More
  10. Metal Man 115V Hobbyist MIG Welder M130

    Metal Man 115V Hobbyist MIG Welder M130

    $299.97

    M130 Wire Feed Welder

    The Metal Man M130 is a 115V MIG and flux core wire feed welder that is designed to be economical and easy to use. It is capable of welding steel up to 3/16 of an inch in a single pass. The cooling fan and thermal overload protection help prevent overheating.

    The attached 6 foot MIG gun and ground cable with clamp along with the gas hose and regulator gets this machine set to weld. Just add gas and wire.

    Learn More

Items 1-10 of 32

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid List

Set Ascending Direction