McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

ORDER BY PHONE:

1-800-561-1752

7AM - 5PM CST 7 Days a Week

SPECIAL SALES & COUPONS!

Subscribe to receive members-only deals in your email

FREE SHIPPING*

ORDERS $149+

View Details

Welding

Welding

Items 1-10 of 32

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid List

Set Ascending Direction
  1. Hobart EZ Tig 165i Inverter Based Welder 500551

    Hobart EZ Tig 165i Inverter Based Welder 500551

    4.0
    1
    $1,379.99

    The EZ-TIG 165i is a complete 230V AC/DC welding package that offers a unique single knob control making it the quickest and easiest AC/DC TIG welder to set up and use. Just plug it into 230 VAC, connect the gas, select the material and thickness, and you are ready to weld. It has superior weld performance from 22 gauge to 3/16 in. (.81 mm to 4.8 mm) in both AC (aluminum) and DC (steel/stainless steel/chromoly). The EZ-TIG 165i is a light weight inverter-based design that includes a foot control.

    Features:

    • EZ to use interface with one knob and one switch control
    • AC output for superior aluminum welding, DC output for mild and stainless steel
    • Fan-On-Demand to only have the fan run when needed reducing dust/debris being pulled into the unit
    • Infinite amperage control for broader operating range with finer control
    • Inverter-based power source provides a more consistent welding arc while using less power
    • Weighs only 50 lb. (23 kg) so it's EZ to take anywhere
    • HF start to allow for a non-contact arc start to eliminate tungsten and material contamination
    • Auto-postflow to provide optimum shielding based on welding amperage without waste or need for adjustment
    • Automatic high temperature shutdown

     

    Comes complete with:

    • Inverter based power source with primary cord and plug attached
    • 12.5 ft (3.8 m) Legacy 17 Weldcraft TIG torch
    • Foot-operated control using the RFCS-RJ45 Remote Foot Control
    • 12 ft. (3.7 m) work cable with clamp
    • Regulator/flow gauge with hose
    • Gas regulator, flowmeter and shielding gas hose

    Power:

    • CC
    • AC/DC
    • 1 Phase

    Material Thickness: Welds 22 gauge to 3/16 inch in both AC (aluminum) and DC (steel/stainless steel/chromoly).

    Skill Level: High

    Applications

    • Auto Body Repair
    • Auto Body Fabrication
    • Home Hobby
    • Metal Art
    • Vocational Training
    • Signs

    Specifications:

    • Rated Output at 20% Duty Cycle:
      • 150 A at 16 VAC
      • 150 A at 16 VDC
    • Welding Amperage Ranges AC/DC: 10 - 165A
    • Max. Open-Circuit Voltage: 80 V
    • Amps Input at Rated Output:
      • AC-230V: 21A
      • DC-230V: 23A
    • Dimensions:
      • H: 17 in (433 mm)
      • W: 9 7/8 in (251 mm)
      • D: 23 7/8 in (608 mm)
    • Net Weight: 50 lb (23 kg)
    Learn More
  2. Hobart Handler 140 MIG Welder 115 Volt, 140 Amp, #500559

    Hobart Handler 140 MIG Welder 115 Volt, 140 Amp, #500559

    4.2
    9
    $499.99

    The Handler 140 operates off 115 volt standard household current for maximum versatility. Comes ready to weld with or without shielding gas, no additional kit required. With an amperage output range of 25 - 140, it easily handles a broad selection of solid mild steel or stainless, flux cored and aluminum wires.

    Summary

    • Comfortable 10 ft. (3 m) H100S2-10 MIG welding gun
    • Built-in gas valve
    • Regulator and gas hose
    • Power cord with plug
    • 10 ft. (3 m) work cable with clamp
    • Sample spool of .030 in. (0.8 mm) self-shielded flux cored welding wire
    • 8 in (203 mm) wire spool adapter
    • Extra .030 in. (0.8 mm) contact tips

    Features

    • Welds 24 gauge up to 1/4 inch in steel
    • Proven built-in wire feeder with quick-release drive roll lever
    • Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding.
    • Four output voltage settings with wire feed tracking provide quick and easy adjustment for different materials and thickness.
    • Easy access to polarity changeover includes storage holes for spare tips
    • Dual groove drive rolls make it easy to switch between .023/.025 in. (0.6 mm) and .030 - .035 in. (0.8 - 0.9 mm) wire
    • Self-resetting thermal overload and motor protection

    Specifications

    • Rated Output at 20% Duty: 90A @ 18.5 VDC
    • Cycle: 63 A @ 21 VDC (CSA Rating)
    • Current Range: 25 - 140 Amps
    • Max Open Circuit Voltage: 28 Volts
    • Wire Feed Speed Range with load: 40 - 700 Inches per Minute
    • Wire Feed Speed Range w/o load: 50 - 740 Inches per Minute
    • Amps Input @ 115V: 20 (15 is CSA rating)
    • Rated Load, 60 KVA: 2.9 (2.2 is CSA rationg)
    • Hertz KW: 2.5 (1.77 is CSA rating

    Dimensions

    • Height: 12-3/8"
    • Width: 10-5/8"
    • Depth: 19-1/2"

    Net Weight: 57 lbs

    Learn More
  3. Hobart Welder 115 & 230V Mig Handler 210MPV 500553

    Hobart Welder 115 & 230V Mig Handler 210MPV 500553

    $894.99

    The Handler® 210MVP Multi-Voltage Plug (MVP) provides flexibility to use either 115V or 230V input power. The MVP allows you to connect to 115V or 230V receptacles in a twist, no tools required. Just choose the plug that fits your receptacle, connect to the Handler® 210MVP’s power cord and start welding. The Handler® 210MVP will automatically adjust itself to the correct input power providing superior arc performance regardless of the power source.

    The Handler® 210MVP offers seven output voltage settings (taps) and infinite wire feed speed control making the unit easy to adjust for different materials, thicknesses and wires. When plugged into 115V power, the 210MVP utilizes 4 voltage settings (taps) and has 140 amps of weld output. When plugged into 230V power, you will get all 7 taps and 210 amps of weld output.

    Features:

    • Dual-voltage input (115V/230V) with the MVP plug makes the unit easy to find a place to plug it in.
    • Max 210 Amps output in a small portable case makes transporting to job sites easier and provides power to weld 3/8" steel.
    • 7 voltage selections (230V), 4 voltage selections (115V), enhanced magnetics and infinite wire feed speed control offers easier fine control for improved arc performance with less spatter for a better bead appearance and less cleanup
    • Spool gun control circuitry is built-in to the Handler® 210MVP for the optional SpoolRunner™ 100 direct plug-in spool gun. Alleviates feeding problems with soft aluminum wires. Also useable with mild or stainless steel welding wires.
    • Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding
    • Easy access to polarity changeover includes storage holes for spare tips
    • Dual groove drive rolls make it easy to switch from one wire size to another. One knurled groove and one smooth groove for .030-.035 in. (0.8-0.9 mm) wire.
    • Self-resetting thermal overload and motor protection

    Comes with:

    • Comfortable 10 ft. (3 m) H100S4-10 MIG welding gun
    • Built-in gas valve
    • Dual gauge regulator and gas hose
    • Power cord with plug
    • 10 ft. (3 m) work cable with clamp
    • Sample spool of .030 in. (0.8 mm) self-shielded flux cored welding wire
    • 8 in. (203 mm) wire spool adapter
    • Extra .030 in. (0.8 mm) contact tips
    • Weld set-up chart

    Applications:

    • Maintenance
    • Construction
    • Auto Body
    • Farm/Ranch
    • Boat/Marine
    • Home

    Specifications:

    • Rated Output at 30% Duty Cycle: 150 A at 23 VDC (230V)
    • Rated Output at 20% Duty Cycle: 90 A at 19 VDC (115V)
    • Current Range:
      • 25 - 210 A (230V)
      • 25 - 140 A (115V)
    • Max. Open-Circuit Voltage:
      • 34 V (230V)
      • 28 V (115V)
    • Wire Feed Speed Range:
      • 40 - 680 IPM
      • 60 - 770 IPM at no load
    • Amps Input at Rated Load, 60 Hz:
      • 230 V - 24
      • kVA - 5.4
      • kW - 4.6
    • Amps Input at Rated Load, 60 Hz:
      • 115 V - 20
      • kVA - 2.9
      • kW - 2.5
    • Dimensions:
      • H: 12-3/8 in (315 mm)
      • W: 10-5/8 in (270 mm)
      • D: 19-1/2 in (495 mm)
    • Net Weight: 79 lb (35.8 kg)
    Learn More
  4. Hobart Plasma Cutter Airforce 700i 500546

    Hobart Plasma Cutter Airforce 700i 500546

    $1,489.99

    Need to cut steel? Thinking about an oxy acetylene cutting torch to do the job? Consider a plasma cutter. This simple technology uses an electrical arc and compressed air to cut steel, aluminum, and other conductive metals.

    The AirForce™ 700i is an economical plasma cutting system for all conductive metals. Inverter-based design and reliable technology pack a lot of performance into a very portable package. The Airforce™ 700i plasma cutting system is excellent for light and heavy industrial users. Automated operations are also well within its range. Unit is compatible with engine-driven welders when powered with a 240 V generator power outlet of 8 kW or more.

    Compared to the complexities of an oxy fuel cutting torch system, plasma cutting is easy

    • Cuts faster than oxy fuel
    • More precise cut, thinner kerf, less slag to clean up
    • Smaller heat-affected zone for less warping
    • No gas pressure settings or flame tuning needed
    • No preheating of metal prior to cutting

    Features:

    • Input Power - 208-230 VAC, 50 amp circuit, single phase
    • New Inverter Design - Powerful cutting ability at just over half the weight of prior model (AirForce 625). Weighs only 31.4 lbs.
    • Capable with Engine-Driven Welders - Capable of cutting 3/8 to 5/8 in. mild steel when powered by an engine-driven welder with a 240 V generator power outlet of 8 kW or more.
    • New Ergonomic Torch - The new HP-70 torch is designed for increased comfort, more efficient cooling and economical replacement cutting tips.
    • Post-flow Air Cooling - Cools the torch and tip after cutting, extending life of replaceable tip and electrode.
    • Fan-On-Demand - Runs only when needed reducing dust/debris pulled into unit.
    • Wind Tunnel Technology - Prevents abrasive dust and particles from damaging internal components.
    • Thermal Overload Protection - Built to withstand tough working environments. Rated for 35% duty cycle at 104° Fahrenheit. Duty cycle will increase as environmental temperature decreases.
    • Cable Management Strap - Secures torch, work cable and power cord to make transporting easy and convenient.
    • Line Voltage Compensation (LVC) - Provides peak performance power under variable input voltage conditions (±15%) for steady and cleaner ending cuts.
    • Power Factor Correction - Expands operator’s work area via extension cords while minimizing nuisance trips caused by voltage drops.

    Comes with:

    • HP-70 torch with 16.5ft (5m) lead and consumables
    • 16.5 ft (5 m) heavy duty work clamp
    • 10 ft. (3 m) power cord with 230 VAC, 50 A plug

    Applications:

    • Sheet Metal
    • HVAC
    • Auto Body
    • Farm/Ranch
    • Plumbing

    Specifications:

    • Rated Output at 50% Duty Cycle: 40 A, at 140 VDC
    • Max. Open-Circuit Voltage: 400 V
    • Amps Input at Rated Output, 60 Hz: 208 V -33, 230 V 30
    • kVA: 6.8
    • kW: 6.6
    • Plasma Gas Flow/Pressure: 4.8 CFM (136 L/min) at 90 –120 PSI (621–827 kPA) Recommended
    • Dimensions:
      • H: 11-1/4 in. (286 mm)
      • W: 8-1/4 in. (210 mm)
      • D: 14-1/4 in. (362 mm)
    • Net Weight: 700i w/torch: 31.4 lb (14.2 kg)
    • Ship weight: 35.8 lb (16.2 kg)
    Learn More
  5. Hobart Airforce 250ci Light Weight Plasma Cutter with Air Compressor 500534

    Hobart Airforce 250ci Light Weight Plasma Cutter with Air Compressor 500534

    $819.99

    Need to cut steel? Thinking about an oxy acetylene cutting torch to do the job? Consider a plasma cutter. This simple technology uses an electrical arc and compressed air to cut steel, aluminum, and other conductive metals.

    Designed to cut up to 1/4" mild steel, the AirForce™ 250ci is powered by standard household current (115 VAC). A built-in air compressor and lightweight inverter power supply make this plasma cutter the most convenient, totally portable cutting system available. The AirForce™ 250ci excels at cutting sheet metal and 1/8" mild steel, and can even sever 1/4" steel.

    Compared to the complexities of an oxy fuel cutting torch system, plasma cutting is easy:

    • Cuts faster than oxy fuel
    • More precise cut, thinner kerf, less slag to clean up
    • Smaller heat-affected zone for less warping
    • No gas pressure settings or flame tuning needed
    • No preheating of metal prior to cutting
    • No pressurized gas cylinders to transport
    • No worries about running out of gas on the job
    • No expense for gas refills... ever

    The AirForce™ 250ci comes ready to cut out of the box, with extra replacement tips and a convenient cable management strap for easy transportation. Just pull the trigger and cut.

    Features:

    • New Inverter Design - Powerful cutting ability at half the weight of prior model (AirForce 250A). Weighs only 27 lbs.
    • Built-in Air Compressor - Internal piston-driven air compressor makes the system highly portable. No additional compressor to purchase or transport. Pressure is preset... ready to cut, right out of the box.
    • New Ergonomic Torch - The new HP-25 torch is designed for increased comfort, more efficient cooling and economical replacement cutting tips.
    • Powered by 120V, 20 amp Circuit - Runs on standard household power. No need for 230 volt hookup by utility company.
    • Post-flow Air Cooling - Cools the torch and tip after cutting, extending life of replaceable tip and electrode.
    • Fan-On-Demand - Runs only when needed reducing dust/debris pulled into unit.
    • Diagnostic Lights - LED lights indicate system status for power, temperature, and torch readiness eliminating unnecessary downtime.
    • Thermal Overload Protection - Built to withstand tough working environments. Rated for 35% duty cycle at 104° Fahrenheit. Duty cycle will increase as environmental temperature decreases.
    • Cable Management Strap - Secures torch, work cable and power cord to make transporting easy and convenient.

    Comes with:

    • Built-in piston-driven air compressor
    • HP-25 torch with 16.5 ft (5 m) lead and consumables
    • 16.5 ft (5 m) heavy duty work clamp
    • 7 ft (2.1 m) power cord with 115 VAC plug
    Input Power:
    • 115 VAC, 20 amp circuit, single phase

    Applications:

    • Sheet Metal
    • HVAC
    • Auto Body
    • Farm/Ranch
    • Plumbing

    Specifications:

    • Rated Output at 35% Duty Cycle: 12 A at 110 VDC
    • Max. Open-Circuit Voltage: 325 V
    • Amps Input at Rated Output, 60 Hz:
      • 120 V - 20
      • kVA - 2.4
      • kW - 2.0
    • Plasma Gas Flow/Pressure: Preset with Built-in Compressor
    • Dimensions:
      • H: 10 in (254 mm)
      • W: 7 1/2 in (191 mm)
      • D: 13 in (330 mm)
    • Net Weight: 250ci w/torch: 27 lb (12.3 kg)
    • Ship weight: 30 lb (13.6 kg)
    Learn More
  6. Campbell Hausfeld Pro-250 230-Volt AC/DC Stick Welder-WS4369

    Campbell Hausfeld Pro-250 230-Volt AC/DC Stick Welder-WS4369

    $501.97

    This 230V AC/DC Stick Welder is a smooth consistent welder for use the farm or ranch, in shops or the garage. With its 250 Amp Max. AC output; 160 Amp Max DC output it welds up to 3/8 inch mild steel and uses 1/16 inch, 5/64 inch, 3/32 inch and 1/8 inch rods. It features an integrated thermal overload and indicator light which automatically shuts off to avoid overheating. The indicator lights up when the duty cycle is exceeded, and shuts off when welding can resume The heavy-duty handles are perfect for lifting, cord/cable storage and tie-down straps. The heavy duty housing is welded, powder coated and assemble in the USA. Welder includes: welding leads, electron holder, and ground clamp with cables and holders.

    • Great for use on the farm, ranch, and in the shop
    • Quick connect dinse plugs for easy removal and change from AC to DC
    • Integrated thermal overload and indicator light
    • Infinite output adjustment with fold-in handle
    • Welds in AC or DC
    Learn More
  7. Metal Man 115V Hobbyist MIG Welder M130

    Metal Man 115V Hobbyist MIG Welder M130

    $299.97

    M130 Wire Feed Welder

    The Metal Man M130 is a 115V MIG and flux core wire feed welder that is designed to be economical and easy to use. It is capable of welding steel up to 3/16 of an inch in a single pass. The cooling fan and thermal overload protection help prevent overheating.

    The attached 6 foot MIG gun and ground cable with clamp along with the gas hose and regulator gets this machine set to weld. Just add gas and wire.

    Learn More
  8. Metal Man Mig 180i Inverter

    Metal Man Mig 180i Inverter

    $528.97

    The Metal Man MIG 180i is a 230V Inverter Powered MIG and flux core wire feed welder. Inverter Technology has long been used in production welders for their power efficiency, superior arc performance and extremely low weight. The Metal Man MIG 180i is one of the first welders for the everyday user that includes this technology. The independent and infinite wire feed speed control and voltage control let you dial in the welding arc just the way you want it. The MIG 180i is capable of welding steel up to 5/16 of an inch in a single pass. The cooling fan and thermal overload protection help prevent overheating. The attached 8-1/2 foot MIG gun uses commonly used Tweco Style consumables. With the 6-1/2ft ground cable with clamp along with the gas hose and regulator, this machine set to weld. Just add gas and wire.1 year limited warranty. 

    Learn More
  9. Metal Man Dual Bottle Welding Cabinet DWC2

    Metal Man Dual Bottle Welding Cabinet DWC2

    $379.97

    DWC2 - Dual Bottle Deluxe Welding Cabinet

    The Metal Man Dual Bottle Deluxe Welding Cabinet is an all-inone solution when you have two welders or require two bottles of welding gas. Designed for welder(s) to sit on top of cabinet, and a 6-1/2in. Dual gas cylinder configuration, it makes maneuvering a snap. It includes 4 drawers on ball bearing slides and of varying sizes that provide convenient storage for helmet, hammer, brush and other welding accessories. The keyed cabinet provides additional storage with internal shelves and storage bins on the door. Two cable holders help keep all your cables organized.

    Learn More
  10. Hobart Welder Stickmate LX 235 AC 230V 500420

    Hobart Welder Stickmate LX 235 AC 230V 500420

    $319.99

    Hobart's STICKMATE models are the top performers in their class. The LX 235 AC has up to 235 amps output. With the Accu-Set™ infinite amperage control, weld time increases up to 100% with decreased output.

    Features:

    • Accu-Set™ amperage indicator for accurately controlling amperage or heat output
    • Infinite current control allows the operator to adjust output by as little as 1-amp increments
    • Output selector switch to quickly select low or high range without adjusting the output leads
    • High 100% duty cycle rating (100 Amps AC)
    • Fully varnished magnetic coils for enhanced coil reliability and life

    Comes with:

    • 15 ft. (4.6 m) electrode cable with heavy-duty holder
    • 10 ft. (3 m) work cable with clamp
    • 5 ft. (1.5 m) primary cable with plug

    Power:

    • CC
    • AC
    • 1 Phase

    Processes: AC Stick

    Skill Level: Moderate

    Applications:

    • Maintenance
    • Construction
    • Farm/Ranch
    • Rental
    • Home

    Specifications:

    • Rated Output at 25 VAC:
      • 225 A at 20% Duty Cycle, 60 Hz
      • 225 A at 15% Duty Cycle, 50 Hz
    • Max. Open-Circuit Voltage: 80 V
    • Welding Amperage Ranges:
      • High: 40 - 235 A
      • Low: 30 - 150 A
    • Amps Input at Rated Output, 60 Hz: 230 V: 47.5
    • Dimensions:
      • H: 18 3/4 in (476 mm)
      • W: 12 3/4 in (323 mm)
      • D: 17 1/2 in (445 mm)
    • Net Weight: 85 lb (39 kg)
    Learn More

Items 1-10 of 32

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid List

Set Ascending Direction