McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

ORDER BY PHONE:

1-800-561-1752

7AM - 5PM CST 7 Days a Week

SPECIAL SALES & COUPONS!

Subscribe to receive members-only deals in your email

FREE SHIPPING*

ORDERS $149+

View Details

Welding

Welding

Items 1-10 of 27

per page
Page:
  1. 1
  2. 2
  3. 3

Grid List

Set Ascending Direction
  1. Hobart Airforce 250ci Light Weight Plasma Cutter with Air Compressor 500534

    Hobart Airforce 250ci Light Weight Plasma Cutter with Air Compressor 500534

    $749.99

    Need to cut steel? Thinking about an oxy acetylene cutting torch to do the job? Consider a plasma cutter. This simple technology uses an electrical arc and compressed air to cut steel, aluminum, and other conductive metals.

    Designed to cut up to 1/4" mild steel, the AirForce™ 250ci is powered by standard household current (115 VAC). A built-in air compressor and lightweight inverter power supply make this plasma cutter the most convenient, totally portable cutting system available. The AirForce™ 250ci excels at cutting sheet metal and 1/8" mild steel, and can even sever 1/4" steel.

    Compared to the complexities of an oxy fuel cutting torch system, plasma cutting is easy:

    • Cuts faster than oxy fuel
    • More precise cut, thinner kerf, less slag to clean up
    • Smaller heat-affected zone for less warping
    • No gas pressure settings or flame tuning needed
    • No preheating of metal prior to cutting
    • No pressurized gas cylinders to transport
    • No worries about running out of gas on the job
    • No expense for gas refills... ever

    The AirForce™ 250ci comes ready to cut out of the box, with extra replacement tips and a convenient cable management strap for easy transportation. Just pull the trigger and cut.

    Features:

    • New Inverter Design - Powerful cutting ability at half the weight of prior model (AirForce 250A). Weighs only 27 lbs.
    • Built-in Air Compressor - Internal piston-driven air compressor makes the system highly portable. No additional compressor to purchase or transport. Pressure is preset... ready to cut, right out of the box.
    • New Ergonomic Torch - The new HP-25 torch is designed for increased comfort, more efficient cooling and economical replacement cutting tips.
    • Powered by 120V, 20 amp Circuit - Runs on standard household power. No need for 230 volt hookup by utility company.
    • Post-flow Air Cooling - Cools the torch and tip after cutting, extending life of replaceable tip and electrode.
    • Fan-On-Demand - Runs only when needed reducing dust/debris pulled into unit.
    • Diagnostic Lights - LED lights indicate system status for power, temperature, and torch readiness eliminating unnecessary downtime.
    • Thermal Overload Protection - Built to withstand tough working environments. Rated for 35% duty cycle at 104° Fahrenheit. Duty cycle will increase as environmental temperature decreases.
    • Cable Management Strap - Secures torch, work cable and power cord to make transporting easy and convenient.

    Comes with:

    • Built-in piston-driven air compressor
    • HP-25 torch with 16.5 ft (5 m) lead and consumables
    • 16.5 ft (5 m) heavy duty work clamp
    • 7 ft (2.1 m) power cord with 115 VAC plug
    Input Power:
    • 115 VAC, 20 amp circuit, single phase

    Applications:

    • Sheet Metal
    • HVAC
    • Auto Body
    • Farm/Ranch
    • Plumbing

    Specifications:

    • Rated Output at 35% Duty Cycle: 12 A at 110 VDC
    • Max. Open-Circuit Voltage: 325 V
    • Amps Input at Rated Output, 60 Hz:
      • 120 V - 20
      • kVA - 2.4
      • kW - 2.0
    • Plasma Gas Flow/Pressure: Preset with Built-in Compressor
    • Dimensions:
      • H: 10 in (254 mm)
      • W: 7 1/2 in (191 mm)
      • D: 13 in (330 mm)
    • Net Weight: 250ci w/torch: 27 lb (12.3 kg)
    • Ship weight: 30 lb (13.6 kg)
    Learn More
  2. Hobart Handler 140 MIG Welder 115 Volt, 140 Amp, #500559

    Hobart Handler 140 MIG Welder 115 Volt, 140 Amp, #500559

    4.2
    9
    $499.99

    The Handler 140 operates off 115 volt standard household current for maximum versatility. Comes ready to weld with or without shielding gas, no additional kit required. With an amperage output range of 25 - 140, it easily handles a broad selection of solid mild steel or stainless, flux cored and aluminum wires.

    Summary

    • Comfortable 10 ft. (3 m) H100S2-10 MIG welding gun
    • Built-in gas valve
    • Regulator and gas hose
    • Power cord with plug
    • 10 ft. (3 m) work cable with clamp
    • Sample spool of .030 in. (0.8 mm) self-shielded flux cored welding wire
    • 8 in (203 mm) wire spool adapter
    • Extra .030 in. (0.8 mm) contact tips

    Features

    • Welds 24 gauge up to 1/4 inch in steel
    • Proven built-in wire feeder with quick-release drive roll lever
    • Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding.
    • Four output voltage settings with wire feed tracking provide quick and easy adjustment for different materials and thickness.
    • Easy access to polarity changeover includes storage holes for spare tips
    • Dual groove drive rolls make it easy to switch between .023/.025 in. (0.6 mm) and .030 - .035 in. (0.8 - 0.9 mm) wire
    • Self-resetting thermal overload and motor protection

    Specifications

    • Rated Output at 20% Duty: 90A @ 18.5 VDC
    • Cycle: 63 A @ 21 VDC (CSA Rating)
    • Current Range: 25 - 140 Amps
    • Max Open Circuit Voltage: 28 Volts
    • Wire Feed Speed Range with load: 40 - 700 Inches per Minute
    • Wire Feed Speed Range w/o load: 50 - 740 Inches per Minute
    • Amps Input @ 115V: 20 (15 is CSA rating)
    • Rated Load, 60 KVA: 2.9 (2.2 is CSA rationg)
    • Hertz KW: 2.5 (1.77 is CSA rating

    Dimensions

    • Height: 12-3/8"
    • Width: 10-5/8"
    • Depth: 19-1/2"

    Net Weight: 57 lbs

    Learn More
  3. Hobart Handler 190, 230V MIG Welder - Spool Gun Ready 500554

    Hobart Handler 190, 230V MIG Welder - Spool Gun Ready 500554

    5.0
    3
    $694.99

    The Handler® 190 wire feed welder provides a low cost option to weld aluminum with a small frame MIG welder. The spool gun circuitry is already built in so no extra kits or controls are required. With the optional direct plug-in SpoolRunner™ 100 spool gun, you can eliminate feeding problems associated with aluminum wire – it can also be used with mild or stainless steel wire.

    The Handler® 190 features a 7-position voltage switch and infinite wire feed speed control creating a welding arc that more perfectly matches metal thickness and wire diameter than any competitor in its class - less spatter, professional bead appearance, excellent penetration and minimal post-weld cleanup. The Handler 190® operates on 230V input power and offers an output range of 25 to 190 amps, allowing users to weld materials as thin as 24 gauge and as thick as 5/16 inch.

    The optional SpoolRunner™ 100 direct plug-in spool gun is great for welding aluminum – no more wire feed problems! Just plug the SpoolRunner™ 100 into the Handler® 190 and its ready to go!

    Features:

    • 7 voltage selections, enhanced magnetics and infinite wire feed speed control offers easier fine control of the output parameters for improved arc performance with less spatter for a better bead appearance and less cleanup
    • Welds 24 gauge up to 5/16 inch steel
    • Spool gun control circuitry is built-in to the Handler® 190 for the optional SpoolRunner™ 100 direct plug-in spool gun. Alleviates feeding problems with soft aluminum wires. Also useable with mild or stainless steel welding wires.
    • Proven built-in wire feeder with quick-release drive roll lever
    • Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding
    • Easy access to polarity changeover includes storage holes for spare tips
    • Dual groove drive rolls make it easy to switch from one wire size to another. One knurled groove and one smooth groove for .030-.035 in. (0.8-0.9 mm) wire.
    • Self-resetting thermal overload and motor protection

    Comes with:

    • Comfortable 10 ft. (3 m) H100S4-10 welding gun
    • Built-in gas valve
    • Dual gauge regulator and gas hose
    • Power cord with plug
    • 10 ft. (3 m) work cable with clamp
    • Sample spool of .030 in. (0.8 mm) self-shielded flux cored welding wire
    • 8 in (203 mm) wire spool adapter
    • Extra .030 in. (0.8 mm) contact tips
    • Weld set-up chart

    Power:

    • CV
    • DC
    • 1 Phase

    Material Thickness: Welds 24 gauge up to 5/16 inch

    Skill Level: Low

    Applications:

    • Maintenance
    • Construction
    • Auto Body
    • Farm/Ranch
    • Rental
    • Home

    Specifications:

    • Rated Output at 30% Duty Cycle: 130 A at 21.5 VDC
    • Current Range: 25 - 190 A
    • Max. Open-Circuit Voltage: 31 V
    • Wire Feed Speed Range:
      • 40 - 700 IPM
      • 50 - 740 IPM at no load
    • Amps Input at Rated Load, 60 Hz:
      • 230 V - 20.5
      • kVA - 4.7
      • kW - 3.88
    • Dimensions:
      • H: 12-3/8 in (315 mm)
      • W: 10-5/8 in (270 mm)
      • D: 19-1/2 in (495 mm)
    • Net Weight: 68 lb (31 kg)
    Learn More
  4. Hobart EZ Tig 165i Inverter Based Welder 500551

    Hobart EZ Tig 165i Inverter Based Welder 500551

    4.0
    1
    $1,379.99

    The EZ-TIG 165i is a complete 230V AC/DC welding package that offers a unique single knob control making it the quickest and easiest AC/DC TIG welder to set up and use. Just plug it into 230 VAC, connect the gas, select the material and thickness, and you are ready to weld. It has superior weld performance from 22 gauge to 3/16 in. (.81 mm to 4.8 mm) in both AC (aluminum) and DC (steel/stainless steel/chromoly). The EZ-TIG 165i is a light weight inverter-based design that includes a foot control.

    Features:

    • EZ to use interface with one knob and one switch control
    • AC output for superior aluminum welding, DC output for mild and stainless steel
    • Fan-On-Demand to only have the fan run when needed reducing dust/debris being pulled into the unit
    • Infinite amperage control for broader operating range with finer control
    • Inverter-based power source provides a more consistent welding arc while using less power
    • Weighs only 50 lb. (23 kg) so it's EZ to take anywhere
    • HF start to allow for a non-contact arc start to eliminate tungsten and material contamination
    • Auto-postflow to provide optimum shielding based on welding amperage without waste or need for adjustment
    • Automatic high temperature shutdown

     

    Comes complete with:

    • Inverter based power source with primary cord and plug attached
    • 12.5 ft (3.8 m) Legacy 17 Weldcraft TIG torch
    • Foot-operated control using the RFCS-RJ45 Remote Foot Control
    • 12 ft. (3.7 m) work cable with clamp
    • Regulator/flow gauge with hose
    • Gas regulator, flowmeter and shielding gas hose

    Power:

    • CC
    • AC/DC
    • 1 Phase

    Material Thickness: Welds 22 gauge to 3/16 inch in both AC (aluminum) and DC (steel/stainless steel/chromoly).

    Skill Level: High

    Applications

    • Auto Body Repair
    • Auto Body Fabrication
    • Home Hobby
    • Metal Art
    • Vocational Training
    • Signs

    Specifications:

    • Rated Output at 20% Duty Cycle:
      • 150 A at 16 VAC
      • 150 A at 16 VDC
    • Welding Amperage Ranges AC/DC: 10 - 165A
    • Max. Open-Circuit Voltage: 80 V
    • Amps Input at Rated Output:
      • AC-230V: 21A
      • DC-230V: 23A
    • Dimensions:
      • H: 17 in (433 mm)
      • W: 9 7/8 in (251 mm)
      • D: 23 7/8 in (608 mm)
    • Net Weight: 50 lb (23 kg)
    Learn More
  5. Hobart Champion Elite DC Welder/11,000 Watt AC Generator 500562

    Hobart Champion Elite DC Welder/11,000 Watt AC Generator 500562

    5.0
    2
    $3,299.99

    Designed to be a jobsite workhorse, the Hobart Champion ELITE combines an 11,000 watt generator with a DC welder for general construction and emergency power applications. It features a rugged, fully enclosed case which provides a protective barrier and lowers noise. All receptacles on the ELITE feature push-button reset circuit breakers. Auxiliary power while welding gives you the capability to run other equipment (lights, grinders) at the same time you are welding. With the quick set current control, it is easy to set up, provides smooth arc starts and maintains optimum arc characteristics. Cables sold separately. 

    Features:

    • DC weld output for smooth arc performance and easy starts
    • Four 120 volt GFCI (20 amp), one 240V (50 amp) and one 120/240 volt (50 amp) receptacles with push-button reset circuit breakers
    • Auxiliary power while welding gives you the capability to run other equipment (lights, grinder) at the same time you are welding
    • Heavy-duty construction with 100% duty cycle, fully-enclosed engine design, large battery, rugged electrical connections and wiring
    • Just under 4 ft long and weighs less than competitive units
    • "No tools" oil change and standard hour meter to help maintain routine scheduled oil servicing
    • Quick set current control - easy to set up and start welding.
    • Auto-idle for greater fuel savings and reduced noise.
    Engine:
    • Kohler 23 HP gasoline engine, 3600 RPM
    • Fuel-efficient, low-maintenance, twin-cylinder, 4-cycle, overhead-valve
    • 12 gallon fuel tank for extended run time
    Processes: Stick (SMAW)

    Skill Level: Moderate 

    Applications:

    • Maintenance
    • Construction
    • Farm/Ranch
    • Rental
    • Home

    Specifications

    • Rated Output at 25V:
      • 225 A at 100% Duty Cycle 
    • Max. Open-Circuit Voltage: 80
    • Welding Amperage Range:
      • 40 - 225 A DC
    • Single-Phase Generator Power: 11,000 W (10 kVa/kW), 60 Hz, 120/240 Vac; 9500 watts continuous while not welding
    • Dimensions:
      • H: 28 in (711 mm)
      • W: 20 in (508 mm)
      • D: 41 in (1041 mm)
    • Net Weight: Kohler: 490 lb (222 kg)

    Customer would be required to pay for the liftgate service, if needed on the shipping costs.

    Learn More
  6. Hobart Welder Stickmate LX 235 AC 230V 500420

    Hobart Welder Stickmate LX 235 AC 230V 500420

    $319.99

    Hobart's STICKMATE models are the top performers in their class. The LX 235 AC has up to 235 amps output. With the Accu-Set™ infinite amperage control, weld time increases up to 100% with decreased output.

    Features:

    • Accu-Set™ amperage indicator for accurately controlling amperage or heat output
    • Infinite current control allows the operator to adjust output by as little as 1-amp increments
    • Output selector switch to quickly select low or high range without adjusting the output leads
    • High 100% duty cycle rating (100 Amps AC)
    • Fully varnished magnetic coils for enhanced coil reliability and life

    Comes with:

    • 15 ft. (4.6 m) electrode cable with heavy-duty holder
    • 10 ft. (3 m) work cable with clamp
    • 5 ft. (1.5 m) primary cable with plug

    Power:

    • CC
    • AC
    • 1 Phase

    Processes: AC Stick

    Skill Level: Moderate

    Applications:

    • Maintenance
    • Construction
    • Farm/Ranch
    • Rental
    • Home

    Specifications:

    • Rated Output at 25 VAC:
      • 225 A at 20% Duty Cycle, 60 Hz
      • 225 A at 15% Duty Cycle, 50 Hz
    • Max. Open-Circuit Voltage: 80 V
    • Welding Amperage Ranges:
      • High: 40 - 235 A
      • Low: 30 - 150 A
    • Amps Input at Rated Output, 60 Hz: 230 V: 47.5
    • Dimensions:
      • H: 18 3/4 in (476 mm)
      • W: 12 3/4 in (323 mm)
      • D: 17 1/2 in (445 mm)
    • Net Weight: 85 lb (39 kg)
    Learn More
  7. Hobart Handler 125 MIG Welder 500495

    Hobart Handler 125 MIG Welder 500495

    5.0
    1
    $349.97

    The Handler® 125 operates off 115-volt household current. Comes ready to weld without shielding gas using .030-.035 in (0.8-0.9 mm) flux cored wire. This welder is equipped with a built-in gas valve, and with the addition of a regulator, you're ready to MIG weld with .023-.030 in. (0.6-0.8 mm) solid wire. Use C-25 gas (75% argon/25% CO2) on 24 gauge - 1/8 in steel for a cleaner weld with less spatter. Use Tri-Mix gas and stainless wire for welding on 16-12 gauge stainless steel.

    Features:

    • Welds 24 gauge up to 3/16 inch steel with flux cored wire
    • Proven built-in wire feeder with quick-release drive roll tension lever
    • Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding.
    • Four output voltage settings with wire feed speed tracking provide quick and easy adjustment for different materials and thickness.
    • Dual groove drive rolls make it easy to switch between .023/.025 in. (0.6mm) and .030 - .035 in. (0.6 - 0.9 mm) wire
    • Self-resetting thermal overload and motor protection

    Includes:

    • Comfortable 8 ft. (2.4 m) H-9B gun with liner for .023-.035 in (0.6-0.9 mm) wire
    • .030 in. (0.9 mm) contact tips
    • 10 ft. (3 m) work cable with clamp
    • Sample spool of .030 in. (0.9 mm) self-shielded flux cored wire
    • Spool shaft to accommodate 4 in spools (Optional hub kit available for 8 in spools)
    • Power cord with plug

    Power: CV, DC and 1 Phase

    Processes: MIG (GMAW), Flux Cored (FCAW)

    Material Thickness: Welds 20 gauge up to 3/16 inch

    Specifications:

    • Rated Output at 20% Duty Cycle: 85 A at 17.5 VDC; 60 A at 20 VDC (CSA Rating)
    • Current Range: 30 - 125 A
    • Max. Open-Circuit Voltage: 26 V
    • Wire Feed Speed Range: 50 - 400 IPM; 120 - 480 IPM at no load
    • Amps Input at Rated Load, 60 Hz: 115 V 20 (15 CSA Rating); kVA 2.9 (2.2 CSA Rating) kW 2.5 (1.77 CSA Rating)
    Learn More
  8. Metal Man 230V 40A Plasma Cutter HC40

    Metal Man 230V 40A Plasma Cutter HC40

    $849.97

    The Metal Man P40 Plasma Cutter is a 230V input power portable inverter power source capable of cutting up to 3/8" steel and 1/4" stainless steel or aluminum. A built in air-regulator makes this machine extremely portable for those on-the-go jobs. This machine requires a compressed air supply that can provide 4.5 CFP @ 60 PSI.

    The P40 is packaged with a 18-1/2 foot TRAFIMET plasma torch and a 10 foot quick connect ground cable with clamp.

    • 230V 25 Amp 60 Hz Input Power
    • No Load Voltage 340V
    • Output Range 15 to 40A
    • 35% Duty Cycle @ 40A
    • Overall Dimensions - 17.75 in. x 6.75 in. x 9 in.
    • Weight - 21 lbs
    • 3 year machine warranty
    • 1 Year Torch Warranty
    Learn More
  9. Metal Man Mig 180i Inverter

    Metal Man Mig 180i Inverter

    $528.97

    The Metal Man MIG 180i is a 230V Inverter Powered MIG and flux core wire feed welder. Inverter Technology has long been used in production welders for their power efficiency, superior arc performance and extremely low weight. The Metal Man MIG 180i is one of the first welders for the everyday user that includes this technology. The independent and infinite wire feed speed control and voltage control let you dial in the welding arc just the way you want it. The MIG 180i is capable of welding steel up to 5/16 of an inch in a single pass. The cooling fan and thermal overload protection help prevent overheating. The attached 8-1/2 foot MIG gun uses commonly used Tweco Style consumables. With the 6-1/2ft ground cable with clamp along with the gas hose and regulator, this machine set to weld. Just add gas and wire.1 year limited warranty. 

    Learn More
  10. Hobart Plasma Cutter Airforce 500i 500548

    Hobart Plasma Cutter Airforce 500i 500548

    $1,389.99

    Need to cut steel? Thinking about an oxy acetylene cutting torch to do the job? Consider a plasma cutter. This simple technology uses an electrical arc and compressed air to cut steel, aluminum, and other conductive metals.

    The AirForce™ 500i is an economical plasma cutting system for all conductive metals. Inverter-based design and reliable technology pack a lot of performance into a very portable package. This power source adapts to your work site by operating from either 115 or 230 VAC power through standard household outlet using the Multi-Voltage Plug (MVP).

    Compared to the complexities of an oxy fuel cutting torch system, plasma cutting is easy:

    • Cuts faster than oxy fuel
    • More precise cut, thinner kerf, less slag to clean up
    • Smaller heat-affected zone for less warping
    • No gas pressure settings or flame tuning needed
    • No preheating of metal prior to cutting
    Features:
    • New Inverter Design - Powerful cutting ability at half the weight of prior model (AirForce 400). Weighs only 27.8 lbs.
    • Capable with Engine-Driven Welders - Complete cutting capability when powered by an engine-driven welder with a 240 V generator power outletof 6 kW or more.
    • New Ergonomic Torch - The new HP-50 torch is designed for increased comfort, more efficient cooling and economical replacement cutting tips.
    • Multi-Voltage Plug (MVP) - Allows you to connect to common 120 or 230 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle
    • Post-flow Air Cooling - Cools the torch and tip after cutting, extending life of replaceable tip and electrode.
    • Fan-On-Demand - Runs only when needed reducing dust/debris pulled into unit.
    • Wind Tunnel Technology - Prevents abrasive dust and particles from damaging internal components.
    • Thermal Overload Protection - Built to withstand tough working environments. Rated for 35% duty cycle at 104° Fahrenheit. Duty cycle will increase as environmental temperature decreases.
    • Cable Management Strap - Secures torch, work cable and power cord to make transporting easy and convenient.
    • Line Voltage Compensation (LVC) - Provides peak performance power under variable input voltage conditions (±15%) for steady and cleaner ending cuts.
    • Power Factor Correction - Expands operator’s work area via extension cords while minimizing nuisance trips caused by voltage drops.

    Comes with:

    • HP-50 torch with 16.5 ft (5 m) lead and consumables
    • 16.5 ft (5 m) heavy duty work clamp
    • 10 ft (3 m) power cord with 115/230 VAC, 20 A MVP plug

    Input Power:

    • 115 VAC, 20 amp circuit, single phase
    • 115 VAC, 15 amp circuit, single phase
    • 230 VAC, 50 amp circuit, single phase

    Applications:

    • Sheet Metal
    • HVAC
    • Auto Body
    • Farm/Ranch
    • Plumbing

    Specifications:

    • Rated Output at 35% Duty Cycle:
      • 240 V - 27 A, 92 VDC
      • 120 V - 20 A, 88 VDC
    • Max. Open-Circuit Voltage: 400 V
    • Amps Input at Rated Output, 60 Hz:
      • 120V (15 A) - 20.6
      • 120V (20 A) - 28.8
      • 240V - 13.9
    • Plasma Gas Flow/Pressure: 3.0 CFM (85 L/min) at 90-120 PSI (621–827 kPA) recommended
    • Dimensions:
      • H: 11-1/4 in. (286 mm)
      • W: 8-1/4 in. (210 mm)
      • D: 14-1/4 in. (362 mm)
    • Net Weight: 500i w/torch: 27.8 lb (12.6 kg)
    • Ship weight: 32.6 lb (14.8 kg)
    Learn More

Items 1-10 of 27

per page
Page:
  1. 1
  2. 2
  3. 3

Grid List

Set Ascending Direction