- Ideal for joints with poor fit-up and general repair work
- Smooth bead with low spatter and fast disposition
- Welds 1/8" to 3/8" mild steel
- Works with all brands of welders
Formulated like our industrial-strength J-B WELD cold-weld, MARINE WELD cures as strong as steel, and is water- and weather-proof. It's impervious to saltwater, chemicals, oil, acids, and other corrosive materials, and tolerates extreme temperature fluctuations. Every boat afloat should carry MARINE WELD for quick and permanent repairs from surf board nicks to hull repairs.
How Does J-B Weld Marine Weld Work?
MARINE WELD is packaged in two tubes. One contains liquid steel/epoxy resin, and the other contains hardener. When mixed together in equal portions, a chemical reaction occurs that turns the mixture into a compound as hard and tough as steel -- and with similar properties.
MARINE WELD is so versatile that it's even used by a marine science center to help mend the shells of sea turtles injured by boat propellers.
How to use J-B Weld Marine Weld
Use MARINE WELD as an adhesive, laminate, plug, filler, sealant, and electrical insulator. Squeeze out equal portions from the black and red tubes. Mix thoroughly. Clean surface to be bonded. Apply MARINE WELD, and let it cure. That's all there is to it!
Like metal, MARINE WELD can be formed, drilled, ground, tapped, machined, filled, sanded, and painted. It stays pliable for about 30 minutes after mixing, sets in 4-6 hours, and cures fully in 15-24 hours. It's water-proof; petroleum-, chemical-, and acid-resistent; resists shock, vibration, and extreme temperature fluctuations, and withstands temperatures up to 500° F. MARINE WELD is super strong, non-toxic, and safe to use. Before it sets, you can clean up with soap and water.
What Does J-B Weld Marine Weld Bond To?
Virtually any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper -- just about any porous and non-porous material.
An all-purpose stick electrode for use in all positions on carbon and galvanized steel. 60,000 PSI tensile strength. Deep penetrating, ideal for welding through light to medium amounts of dirty, rusty or painted materials. Runs on AC or DCEP (reverse) polarity.
- Size: 1/8".
- 1lb. Plastic.
Curved (Wood) Handle Carbon Steel Wire Scratch Brush With 1-1/2" Metal Scraper. 13-11/16" overall length (OAL) x .014 carbon steel wire x 3x19 rows.Learn More
#2 Welding Cable, sold by the foot. 250' spool.Learn More
Flat bead with deep penetrating arc. Better for dirty or rusted steel. 1 lb package.
- E6011-Deep penetration
- 1/8 inch diameter
- 85-130 welder amp setting
- Works with all 230V input power arc (stick) welders
These sturdy, high-quality brushes have durable nylon heat-resistant handles and are ideal for removing debris and polishing welds. Super Scraper Handle type. Wire type: Carbon SteelLearn More