Rigid 50mm dual cup eye goggles come with #5 shade for acetylene welding. Compact design with elastic headband provides years of trouble-free eye protection.Learn More
The Bernzomatic Flexible utility lighter is ideal for lighting grills, candles, or fire pits. This lighter contains a flexible stem, windproof and adjustable flame for convenient and easy lighting. Perfect for hard to reach places.
- Flexible stem
- Child resistant mechanism for safety
- Ergonomic handle designed for maximum comfort
KwikWood is a hand-mixable epoxy putty, formulated to repair and rebuild wood. After mixing, it cures to the same density as wood and becomes an integral part of the repair. For use on exterior or interior applications, it contains no solvents, will not rot, shrink, crack or pull away. KwikWood has a 15-25 minute work life. After 60 minutes, it can be machined, drilled, tapped, sanded, filed and painted. Stronger than wood, KwikWood dries to a light tan color.
- Cut: Remove required amount of putty.
- Mix: Thoroughly knead putty with fingers to a uniform color.
- Apply: Press putty firmly to the surface to be repaired.
- Dry Rot
- Knot Holes
- Window & Door Frames
- Screw Holes
- Insect Damage
- Furniture & Carvings
- Gouges & Cracks
- PVC Trim Board
- Strength 900 PSI
- Set Time 15-25 Minutes
- Cure Time 1 Hour
- Cure Color Light Tan
* For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair. STAINING: KwikWood accepts stain differently from wood. Some types of pigments and colorants may be added during the mixing step. Always test for stain acceptance, color match and hardening before application.Learn More
An all-purpose stick electrode for use in all positions on carbon and galvanized steel. 60,000 PSI tensile strength. Deep penetrating, ideal for welding through light to medium amounts of dirty, rusty or painted materials. Runs on AC or DCEP (reverse) polarity.
- Size: 1/16".
- 1b Plastic.
For high-deposition requirements, this stick electrode is ideal for applications requiring light penetration and faster travel speeds. It runs in all positions on AC or DCEN (straight) or DCEP (reverse) polarity. 70,000 PSI tensile strength.
- Size: 1/16".
- 1b. Plastic.
A light to medium penetrating all-purpose stick electrode for use in all positions, on carbon steel. Runs on AC or DCEP (reverse) polarity or DCEN (straight) polarity. 60,000 PSI tensile strength. Good for general, all-purpose applications and joints with poor fit-up.Learn More
Mild steel copper-coated oxy-acetylene gas welding rods are made of high-quality carbon steel of uniform and tightly controlled analysis. These rods have a melting point of 2750° F and produce quality welds of up to 65,000 PSI tensile strength. Ideal general purpose rod for welding all low-carbon steels. Available in 1 lb. packs.
- 3/32" Diameter
- 18" Length
- 8 Qty