McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

ORDER BY PHONE:

1-800-561-1752

7AM - 5PM CST Monday - Saturday

WIN A $200 GIFT CERTIFICATE

Enter the contest by signing up for our newsletter

FREE SHIPPING*

ORDERS $99+

Reveal Coupon

Welders

Welders

3 Item(s)

per page

Grid List

Set Descending Direction
  1. Hobart Champion Elite 11,000-Watt Gas Engine-Driven Welder/Generator 500557

    Hobart Champion Elite 11,000-Watt Gas Engine-Driven Welder/Generator 500557

    $3,299.99

    Combining an 11,000 watt generator with a 260 Amp AC or 225 Amp DC stick welder, the Champion® ELITE is ideal for farm/ranch, general construction, and emergency power applications or as a stand-alone generator. The unit provides strong and reliable generator power to run compressors, pumps, lights, hand tools and other equipment. It's also capable of producing power while welding so multiple users can work on tasks at the same time.

    Features:

    • AC and DC weld output for smooth arc performance and easy starts
    • Four 120 volt (20 amp), one 240V (50 amp) and one 120/240 volt (50 amp) receptacles with push-button reset circuit breakers
    • Auxiliary power while welding gives you the capability to run other equipment (lights, grinder) at the same time you are welding
    • Heavy-duty construction with 100% duty cycle, fully-enclosed engine design, large battery, rugged electrical connections and wiring
    • Just under 4 ft long and weighs less than competitive units
    • "No tools" oil change and standard hour meter to help maintain routine scheduled oil servicing
    • Quick set current control - easy to set up and start welding.
    • Auto-idle for greater fuel savings and reduced noise.
    Engine:
    • Kohler 23 HP gasoline engine, 3600 RPM
    • Fuel-efficient, low-maintenance, twin-cylinder, 4-cycle, overhead-valve
    • 12 gallon fuel tank for extended run time
    Processes: Stick (SMAW)

    Skill Level: Moderate 

    Applications:

    • Maintenance
    • Construction
    • Farm/Ranch
    • Rental
    • Home

    Specifications

    • Rated Output at 25V:
      • 225 A at 100% Duty Cycle – AC
      • 210 A at 100% Duty Cycle – DC
    • Max. Open-Circuit Voltage: 80
    • Welding Amperage Range:
      • 50 – 225 A AC
      • 50 – 210 A DC
    • Single-Phase Generator Power: 11,000 W (10 kVa/kW), 60 Hz, 120/240 Vac; 9500 watts continuous while not welding
    • Dimensions:
      • H: 31-1/8 in (791 mm)
      • W: 20 in (508 mm)
      • D: 41 in (1041 mm)
    • Net Weight: Kohler: 490 lb (222 kg)

    Customer would be required to pay for the liftgate service, if needed on the shipping costs.

    Learn More
  2. Hobart Welder Ironman 230 Mig 500536

    Hobart Welder Ironman 230 Mig 500536

    $1,539.99

    The IronMan™ 230 is a total redesign of the full-size MIG platform, outperforming the competition on arc quality, voltage control, duty cycle and value. It delivers 30-250 amps of pure power in a heavy duty cabinet. The arc of the new IronMan™ 230 is optimized to deliver a flawless weld, making spatter and post-weld cleanup almost non-existent. The IronMan™ 230 easily runs aluminum – just add the optional Hobart DP-3545-20 spool gun and you’re ready to weld aluminum from 18 gauge to 1/2".

    For improved feedability with aluminum wires or for extended reach with other wires add the Hobart 3545-20 spool gun with its 20 ft. cable length.

    Features:

    • Welds 24 gauge up to 1/2 inch material in a single pass
    • Excellent aluminum welding with optional Hobart DP-3545-20 spool gun, also provides extended reach with other wires
    • Twelve-tap voltage control allows for a smooth easy-to-control arc
    • Infinite wire feed speed control for precise adjustment of penetration and weld bead shape
    • Comes complete with 200 amp gun and built-in running gear/cylinder rack
    • Unique spool hub makes changing from 2, 10, 33 and 45 lb. wires spools a snap with a tool-less brake tension knob and automatic wire alignment
    • Built-in thermal overload protects the unit
    • Reversible drive rolls: two grooves for two wire sizes on one drive roll. Decreases spare parts and changeover time
    • Hinged door for easy access to wire drive system for spool and drive roll changes
    • Aluminum wire drive system delivers 0 – 700 IPM wire feed speed

    Comes with:

    • 15 ft. (4.6 m), 200 amp MIG gun
    • Regulator/flowmeter
    • 5 ft. (1.5 m) gas hose with fitting
    • 10 ft. (3 m) primary input cable with plug
    • 10 ft. (3 m) work cable with clamp
    • .030/.035 in. dual groove drive roll
    • Extra contact tips
    • Built-in running gear/cylinder rack
    • Weld set-up and parts information chart

    Material Thickness: Welds 24 gauge up to 1/2 inch

    Applications:

    • Maintenance
    • Construction
    • Auto Body
    • Farm/Ranch
    • Rental
    • Home

    Specifications:

    • Rated Output at 60% Duty Cycle: 175 A at 25.5 VDC
    • Current Range: 30 - 250 A
    • Max. Open-Circuit Voltage: 35 V
    • Wire Feed Speed Range: 0 - 700 IPM
    • Amps Input at Rated Load, 60 Hz:
      • 200 V - 37
      • 230 V - 32.5
      • kVA - 7.4
      • kW - 6.3
    • Dimensions:
      • H: 31 ½ in. (800 mm)
      • W: 18 7/8 in (479 mm)
      • D: 36 1/2 in (927 mm)
    • Net Weight: 185 lb (84 kg)
    Learn More
  3. Hobart EZ Tig 165i Inverter Based Welder 500551

    Hobart EZ Tig 165i Inverter Based Welder 500551

    $1,379.99

    The EZ-TIG 165i is a complete 230V AC/DC welding package that offers a unique single knob control making it the quickest and easiest AC/DC TIG welder to set up and use. Just plug it into 230 VAC, connect the gas, select the material and thickness, and you are ready to weld. It has superior weld performance from 22 gauge to 3/16 in. (.81 mm to 4.8 mm) in both AC (aluminum) and DC (steel/stainless steel/chromoly). The EZ-TIG 165i is a light weight inverter-based design that includes a foot control.

    Features:

    • EZ to use interface with one knob and one switch control
    • AC output for superior aluminum welding, DC output for mild and stainless steel
    • Fan-On-Demand to only have the fan run when needed reducing dust/debris being pulled into the unit
    • Infinite amperage control for broader operating range with finer control
    • Inverter-based power source provides a more consistent welding arc while using less power
    • Weighs only 50 lb. (23 kg) so it's EZ to take anywhere
    • HF start to allow for a non-contact arc start to eliminate tungsten and material contamination
    • Auto-postflow to provide optimum shielding based on welding amperage without waste or need for adjustment
    • Automatic high temperature shutdown

     

    Comes complete with:

    • Inverter based power source with primary cord and plug attached
    • 12.5 ft (3.8 m) Legacy 17 Weldcraft TIG torch
    • Foot-operated control using the RFCS-RJ45 Remote Foot Control
    • 12 ft. (3.7 m) work cable with clamp
    • Regulator/flow gauge with hose
    • Gas regulator, flowmeter and shielding gas hose

    Power:

    • CC
    • AC/DC
    • 1 Phase

    Material Thickness: Welds 22 gauge to 3/16 inch in both AC (aluminum) and DC (steel/stainless steel/chromoly).

    Skill Level: High

    Applications

    • Auto Body Repair
    • Auto Body Fabrication
    • Home Hobby
    • Metal Art
    • Vocational Training
    • Signs

    Specifications:

    • Rated Output at 20% Duty Cycle:
      • 150 A at 16 VAC
      • 150 A at 16 VDC
    • Welding Amperage Ranges AC/DC: 10 - 165A
    • Max. Open-Circuit Voltage: 80 V
    • Amps Input at Rated Output:
      • AC-230V: 21A
      • DC-230V: 23A
    • Dimensions:
      • H: 17 in (433 mm)
      • W: 9 7/8 in (251 mm)
      • D: 23 7/8 in (608 mm)
    • Net Weight: 50 lb (23 kg)
    Learn More

3 Item(s)

per page

Grid List

Set Descending Direction