- Output Range 65 to 200A AC
- 10-Percent Duty Cycle @ 180A
- 1 year warranty
- 230V 41 Amp 60 Hz Input Power
- Product Dimensions: 19 x 14 x 20 inches
The Metal Man FC125 is a 115V flux core only wire feed welder that is designed to be economical and easy to use. It is capable of welding steel up to 3/16 of an inch in a single pass using either .030 or .035 flux core wire. The cooling fan and thermal overload protection help prevent overheating.
The attached 6 foot flux core gun and ground cable with clamp make this machine portable and ready to weld out of the box.Learn More
The Metal Man Arc 200 is a 230V powered, 200 Amp AC Stick Welder. This machine is capable of welding up to 3/8 inch mild steel in a single pass. It is capable of welding electrode sizes from 1/16 inch up to 5/32 inch. There is a built in cart that makes it easy to move this machine to the work site.
With built-in Thermal Overload protection this machine is reliable and affordable.
EWC2 - Mini Welding Cabinet
The Metal Man mini welding cabinet helps keep your shop organized by stowing all your welding tools and accessories. It is designed for the welder to sit on top of cabinet, has a 7 1/2in. gas cylinder configuration, and is on wheels and casters for easy maneuvering.
A keyed storage cabinet helps to secure your welding helmet and other welding accessories. Two cable holders provide easy access to welding cables.Learn More
DWC1 - Deluxe Welding Cart
The Metal Man deluxe welding cabinet provides an integrated all-in-one solution for a portable welder or plasma cutter applications. Designed for equipment to sit on top of cabinet, and a 7 1/2in. gas cylinder configuration, it makes maneuvering a snap. It includes 4 drawers of varying sizes that provide convenient storage for helmet, hammer, brush and other welding accessories, along with hooks that provide easy access to welding cables.
- Capacity: 150 lbs.
- Dimensions: 28.3" x 17.6" x 33.5"
- 7" rear wheels
- 2 locking front casters
- Steel construction with Powder Coat Finish
- Ball Bearing Drawer Sides
M130 Wire Feed Welder
The Metal Man M130 is a 115V MIG and flux core wire feed welder that is designed to be economical and easy to use. It is capable of welding steel up to 3/16 of an inch in a single pass. The cooling fan and thermal overload protection help prevent overheating.
The attached 6 foot MIG gun and ground cable with clamp along with the gas hose and regulator gets this machine set to weld. Just add gas and wire.Learn More
Campbell Hausfeld GW003100AJ Wheel / Handle Kit for GW450001ACLearn More
Get the range and power to handle many Stick welding and hard surfacing jobs. The 205 AC has up to 205 amps output. With the Accu-Set infinite amperage control, weld time increases up to 100% with decreased output.
- Accu-Set™ amperage indicator for accurately controlling amperage or heat output
- Infinite current control allows the operator to adjust output by as little as 1-amp increments
- High 100% duty cycle rating (90 Amps AC)
- Fully varnished magnetic coils for enhanced coil reliability and life
- Max. 80 Open-circuit voltage assists with arc starting and arc stability
- 15 ft. (4.6 m) electrode cable with heavy-duty holder
- 10 ft. (3 m) work cable with clamp
- 5 ft. (1.5 m) primary cable with plug
- 1 Phase
- AC Stick
- Rated Output at 25 VAC: 165 A at 20% Duty Cycle 50/60 Hz
- Max. Open-Circuit Voltage: 80 V
- Welding Amperage Range: 30 - 205 A
- Amps Input at Rated Output, 60 Hz: 230 V: 47.5
- H: 18 3/4 in (476 mm)
- W: 12 3/4 in (323 mm)
- D: 17 1/2 in (445 mm)
- Net Weight: 83 lb (38 kg)